mirror of
https://github.com/max-sixty/worktrunk.git
synced 2026-11-22 02:53:04 +08:00
codex/plugin-removal-interruption
1152
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
ab9cecb171 |
Fix demo command tracking and simplify Try it copy (#4546)
Demoshell's guide needs Bash to report command exit status before it can verify successful steps. Put the command-tracker prompt and OSC 133 exit markers in the startup rcfile, skipping the initial prompt so Studio does not mistake it for the app exiting. Keep the recipe and published guide representation aligned with the working demo. Shorten the Try it page to the introduction, loading note, full-page fallback, attribution, and install link. This follows [#4280](https://github.com/max-sixty/worktrunk/pull/4280). Validation: ARM64 Alpine recipe and guide walkthrough; startup, failed-command, and successful-command marker checks; published demo walkthrough; docs sync test and build; rendered copy review. The full local gate ran 5,392 tests: 5,389 passed and three PowerShell tests failed because the installed PowerShell 7.5.2 crashes with `Stack overflow.` even on `pwsh -NoProfile -Command '1 + 1'` outside the repository. Pre-commit checks pass separately. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
d965d819f2 |
docs: add an unlinked browser demo for production testing (#4280)
Adds a **Try it** page at `/try-it/`, available by direct URL while production embedding is tested; excluded from navigation, site search, and the sitemap, with a noindex directive, with a live Worktrunk demo in a browser-local Alpine ARM64 VM via [Demoshell](https://demoshell.com). Nothing downloads until Run is pressed. The page includes Demoshell attribution and a permanent full-page fallback link. The VM definition lives in `docs/demos/demoshell/`: the setup recipe, Bash startup rcfile, and guide. The guide covers list → create → edit → list → merge, followed by an optional manual picker step. Merge commits the change automatically. Studio must launch Bash explicitly: changing root's login shell does not replace its running ash session. The prompt retains the `arm64js:` prefix required by Demoshell's command tracker. The README maps each file to its Studio field and provides an ARM64 Alpine Docker check using the same Bash entry point. **Production test rollout:** `m/tui:worktrunk` resolves from the allowed `worktrunk.dev` origin. The recipe, startup file, and guide draft are entered in Studio, but the final snapshot upload is stalled at 1% after setup completes. The currently published snapshot predates the prompt repair, and visitors still receive the old guide. The page is intentionally unlinked so it can be merged and tested on the accepted production origin before broader exposure. The corrected snapshot must finish saving, then the new guide must be published and tested in a fresh visitor session. Validation: the required command patterns and output checks pass on ARM64 Alpine with `wt v0.81.0`. In the real Studio preview, applying the Bash/prompt corrections allowed the required steps to check off, merge to commit automatically, and the shell to return to main. The optional picker opens and exits; its guide step uses manual completion because Demoshell did not detect the alternate-screen exit. Local docs build, type checks, plugin/site tests, and docs sync passed. Final snapshot publication and a fresh end-to-end run remain blocked by the upload. The sidebar-order test accepts Astro page routes, and the page-outline test exempts `/try-it/`, whose table of contents is disabled to give the demo more width. Disclosure from the original author: they run Demoshell. Hosting is free for eligible open-source projects, and the embed carries attribution. > _This was written by Codex on behalf of max-sixty_ --------- Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> Co-authored-by: Claude <noreply@anthropic.com> Co-authored-by: Maximilian Roos <m@maxroos.com> |
||
|
|
93beb0670d |
fix: return one complete JSON result for switch (#4345)
JSON switches now emit one result after synchronous work, including any --execute command, finishes. Accepted invocations return the existing success fields, or an object with an `error` string when target discovery, configuration, directory directives, or execution fails. Execute output goes to stderr, and child errors retain exit and signal metadata. Typed Git diagnostics retain captured Git details and recovery hints, including commands for a branch left behind after failed worktree creation. Argument errors and picker cancellation produce no JSON; background hooks remain independent. Validation: the full project gate passed (5,028 tests, one skipped), plus focused checks covering early and late failures, child output and signals, picker behavior, and plain output. Generated help, documentation synchronization and build, and independent review passed. The change also removes a synthetic stdin write from an existing noninteractive alias-refusal test that raced with process exit. > _This was written by Codex on behalf of max-sixty_ --------- Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
13d4d5b4e2 |
docs: release 0.81 documentation review fixes (#4531)
Applies the documentation review of the 0.81.0 candidate (v0.80.0..15b1ed10c: CLI help, generated and authored site pages, skill and plugin copies). Each claim was checked against the code, and the behavioral ones against a build of this branch on scratch repos. Generated pages, skill mirrors, `list-v2.json` and help snapshots are regenerated from their sources. - `wt hook` "Interactive hooks": says which hooks inherit stdin (a command running alone in the foreground) and which get empty stdin (concurrent commands, background `post-*` hooks, prune's fanned-out hooks). The pass-values-as-arguments example moves to the end of "Template variables". - Extending: the hooks/aliases stdin row states the rule in the same words for both. - Shell integration: "Why shell integration exists" and "Checking status" state their content instead of only linking away. "Files created" again distinguishes appended lines (bash, zsh, PowerShell) from whole files (fish, Nushell), and notes that the PowerShell profiles are created if missing. - `wt step prune` min-age guard: says what the guard prevents, where a branch-only candidate's age comes from, and when a branch with no reflog looks new again. - `wt step squash` backup: covers everything staged (by hand or by `--stage`), not only changes staged beforehand. - `wt merge`: the long help defines the source before using it; `--branch` help says "defaults to the current branch". - `wt remove` JSON: `detached_worktree` is the detached worktree at the branch's expected location, which the removal leaves in place. - `wt switch`: shorter "Custom path" sentence; "Starting list-only" becomes "Hiding the preview". - `list-v2.json`: "probe" becomes "check", as in the list help. - Agent integration page: drops the incomplete Codex hooks sentence; OpenCode's `worktree.directory` "is ignored", and new branches start from the default branch. - Claude Code `WorktreeCreate` (site page and plugin README): the hook runs plain `wt switch` when the branch already exists, which returns its worktree. - Plugin README: the activity-tracking example no longer repeats the hook list above it. No finding was skipped. Three were adapted: the squash text names hand-staged changes as well as `--stage`; the `wt merge` text keeps the word "source", which later paragraphs use; the plugin README keeps the example's `wt list` sentence and drops only the repeated mechanism. > _This was written by Claude Code on behalf of max-sixty_ Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
d890a16645 |
fix(templates): add the tojson filter for structured vars (#4524)
Since the minijinja 3 upgrade in #4442, `{{ vars.cfg }}` renders a JSON object or array var in Python style (`{'port': 3000}`) where v0.80.0 rendered JSON, and `{{ vars.cfg | tojson }}` fails with "unknown filter" because minijinja's `json` feature was off. Since #3129 removed JSON on hook stdin, templates are how hooks get structured values, so they had no way to pass one to `jq` or `curl -d`. This enables the `json` feature and documents `tojson` beside the vars dot-access example in `wt hook --help`. `tojson` writes `'`, `<`, `>` and `&` inside strings as `\u` escapes, which JSON parsers decode; the shell formatter still single-quotes the result, so `-d {{ vars.config | tojson }}` passes one argument. Two adjustments come with the feature. It makes minijinja choose JSON autoescaping from a template name ending in `.json`, `.js`, `.yaml` or `.yml`, as it already did HTML escaping for `.html`. Worktrunk's template names are config keys, so a custom column named `json` would have rendered JSON-quoted cells, and one named `html` already rendered HTML-escaped cells; the shared template environment now turns name-based autoescaping off. minijinja's `tojson` also writes an undefined value as `null`, so a wrapper rejects it the way printing does, and a mistyped `vars` key errors instead of sending `null`. Verified by rerunning the release-review repro against the branch binary: `{{ vars.cfg | tojson }}` now renders `{"list": [1, 2], "port": 3000}`, and a custom column named `json` or `html` renders the raw value. New coverage: a doc-template test for the documented `curl` example in POSIX mode, a missing-key `tojson` error case, and the custom-column test now uses a header named `json`. Each of the three fails with its part of the change reverted. Bare `{{ vars.cfg }}` still renders Python-style; `tojson` is the supported way to get JSON. > _This was written by Claude Code on behalf of max-sixty_ --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
9f08a95720 |
fix(commit): stage before pre-commit hooks as well as after (#4520)
Since v0.80.0, pre-commit hooks during `wt merge` and `wt step squash` no longer see the uncommitted changes in the index. #4321 moved the squash path to run hooks before staging so a formatter hook's edits would land in the squash commit. A hook that reads the index (`pre-commit run`, lint-staged, `git diff --cached`) then saw nothing staged and passed, so a merge that v0.80.0 blocked committed the offending changes. All commit paths now stage, run the pre-commit hooks, and stage again with the same `--stage` mode. Hooks see the changes, formatter edits still land in the commit, and the generated commit message reads the post-hook index. The second staging warns only about untracked paths the hooks created. This also applies to `wt step commit` and `wt merge --no-squash`, which ran hooks before staging even in v0.80.0, so an index-reading hook now blocks those commits too, and a failed hook leaves the changes staged there as it already did for squash. Verified with the release-review repros: a `git diff --cached` gate and a pre-commit-framework `pre-commit run` gate both block `wt merge` and `wt step squash` again, as on v0.80.0, where main committed the changes. A `sed` formatter hook's edit is in the commit and in the prompt the commit-message command receives, with a clean tree afterwards. The new `test_pre_commit_hook_sees_staged_changes` covers `wt merge` and `wt step commit` and fails without the fix. `test_step_commit_refuses_hook_created_conflict` now unstages in its hook, because `git merge` refuses to start once the index is staged. The other snapshot changes move the auto-staging warning ahead of the hook output. > _This was written by Claude Code on behalf of max-sixty_ Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
25d0c44b0b |
fix(remove): drain the trash with one background process per repository (#4516)
A prune of many worktrees started one `rm -rf` per staged worktree. On a 193-worktree prune those processes competed for the disk: together they deleted about 1,500 files/s on 3 cores, while a single `rm` alone managed 3,000–5,400 files/s on under one core. Read-only directories (`dr-xr-xr-x`, as installers leave them) also made `rm -rf` fail, so those entries stayed in `.git/wt/trash/` and every later sweep retried them. Removal now starts a hidden `wt _drain-trash`, which holds `.git/wt/trash.lock` and deletes every staged entry, including entries staged while it runs. A removal or sweep that finds the lock held starts nothing, so a prune runs about one deleter. The sweep after `wt remove` drains leftovers immediately rather than waiting 24 hours. Priority is unchanged (`taskpolicy -b` on macOS). The drain uses wt's own walker (`src/remove_dir.rs`), which `wt remove --foreground` and `wt config state clear` also use: - On Unix it opens each directory relative to its parent's descriptor with `O_NOFOLLOW` and unlinks relative to the holding directory. The old path-based walker could follow a directory swapped for a symlink mid-walk and delete outside the tree; a swap-race script reproduced that, and the new walker lost nothing in 20 runs. - It grants the owner `rwx` on each directory it enters, so read-only and unreadable trees are deleted, never changing a symlink's target. Linux's `fchmodat` has no `AT_SYMLINK_NOFOLLOW`, so there it opens the directory with `O_PATH | O_NOFOLLOW` and changes the mode through `/proc/self/fd`. - Subdirectories are removed sequentially, so open descriptors stay bounded by depth. On a 199k-entry pnpm `node_modules` it deleted about twice as fast as `rm -rf`. - On Windows it uses `std::fs::remove_dir_all`, which removes junctions without following them. > _This was written by Claude Code on behalf of max-sixty_ --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
4cb4267619 | feat(templates): add expected_worktree_path_of_branch() template function (#4502) | ||
|
|
ca0563dc8d |
feat(plugin): route OpenCode 2 worktrees through wt switch and wt remove (#4489)
Under OpenCode 2, the plugin that `wt config plugins opencode install` writes now registers a `worktrunk` worktree strategy. Worktrees that OpenCode creates and removes then go through `wt switch --create` and `wt remove`, the same way the Claude Code plugin's `WorktreeCreate`/`WorktreeRemove` hooks already route them. This was requested in #4488. I ran the strategy locally against a scratch repo with this branch's `wt` and a fake OpenCode context. I haven't run it inside a real OpenCode 2 session, which CI can't drive. How each callback maps ([`dev/opencode-plugin.ts`](https://github.com/max-sixty/worktrunk/blob/1c906f5599d7a16df832c56c51aa82d13c82bbd3/dev/opencode-plugin.ts)): - **create**: runs `wt switch [--create] <name> [--base <ref>] --no-cd --format=json` in the source checkout and returns `.path`. OpenCode's `branch` input is a [starting ref, not a branch name](https://github.com/anomalyco/opencode/blob/dev/packages/plugin/src/worktree.ts), so `<name>` is the basename of the directory OpenCode suggests (the name the user typed, or a generated slug). The path comes from `worktree-path`, since OpenCode accepts a different directory than the one it suggested. An existing branch is reopened, as in #4487. Passing a starting ref for an existing branch is refused rather than ignored. - **remove**: runs `wt remove --foreground [--force] <dir>`. It does nothing if the checkout is already gone. - **list**: reads `git worktree list --porcelain -z` and reports the first record as `root`. Bare and prunable entries are skipped. Things a maintainer may want to weigh: - **On by default.** OpenCode selects a strategy as soon as a plugin adds one. Every OpenCode 2 user with the plugin installed switches to worktrunk-managed worktrees, and OpenCode's `worktree.directory` setting stops applying. This matches the Claude Code plugin. The docs page says so. - **No force prompt on a dirty worktree.** OpenCode only offers to force when the error is an instance of its own `Worktree.OperationError` ([`operationError`](https://github.com/anomalyco/opencode/blob/dev/packages/core/src/worktree.ts) uses `instanceof`). A standalone plugin file can't import that class: the CLI's runtime shim for `@opencode/plugin` doesn't export `Worktree`. A dirty removal fails with worktrunk's own message instead (`Cannot remove worktree: … has uncommitted changes`), and nothing is deleted. - **Default base.** With no starting ref, the new branch starts from worktrunk's default (the default branch). OpenCode's `git` strategy uses the source checkout's HEAD instead. <details><summary>Local check</summary> A Node harness imported the plugin, called `setup` with a stub `ctx.worktree.transform`, and ran each callback against a fresh repo with `target/debug/wt` on PATH: - create → `ocrepo.brave-tiger` (the `worktree-path` default), and `list` returned root + that worktree - create with `branch: "brave-tiger"` → a second worktree based on it - create for an existing branch with a starting ref → refused. Without a ref → reopened the existing worktree - remove of a dirty worktree → wt's error. With `force` → removed. A repeat remove → no-op - final `list` → root only `test_docs_are_in_sync` and the 14 `opencode` integration tests pass. </details> Closes #4488 Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
7c265fc730 |
Note in wt switch docs that Alt is Option on macOS (#4483)
> _This was written by Codex on behalf of max-sixty_ |
||
|
|
5814c92b2d |
chore: bump the docs-site group in /docs with 4 updates (#4444)
Bumps the docs-site group in /docs with 4 updates: [@astrojs/markdown-remark](https://github.com/withastro/astro/tree/HEAD/packages/markdown/remark), [@astrojs/starlight](https://github.com/withastro/starlight/tree/HEAD/packages/starlight), [astro](https://github.com/withastro/astro/tree/HEAD/packages/astro) and [playwright](https://github.com/microsoft/playwright). Updates `@astrojs/markdown-remark` from 7.3.1 to 7.3.2 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/withastro/astro/releases">@astrojs/markdown-remark's releases</a>.</em></p> <blockquote> <h2><code>@astrojs/markdown-remark</code><a href="https://github.com/7"><code>@7</code></a>.3.2</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18099">#18099</a> <a href="https://github.com/withastro/astro/commit/69872618b7b7c915b2bd51a4b41e3a3e3116f3bb"><code>6987261</code></a> Thanks <a href="https://github.com/apps/renovate"><code>@renovate</code></a>! - Adds YAML parsing with timestamp and merge key support, and formats YAML errors consistently across Astro, Markdown, MDX, and Markdoc.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18139">#18139</a> <a href="https://github.com/withastro/astro/commit/d047b5c23c273d993470258a84bf71852889c76e"><code>d047b5c</code></a> Thanks <a href="https://github.com/breken-ai"><code>@breken-ai</code></a>! - Fixes Markdown code blocks with languages ending in a symbol, such as <code>c#</code>, <code>c++</code>, and <code>f#</code>, being highlighted as <code>c</code> or <code>f</code></p> </li> <li> <p>Updated dependencies [<a href="https://github.com/withastro/astro/commit/69872618b7b7c915b2bd51a4b41e3a3e3116f3bb"><code>6987261</code></a>, <a href="https://github.com/withastro/astro/commit/62b13ba3e0068057a47fbfc2ab8842b263c68f0d"><code>62b13ba</code></a>]:</p> <ul> <li><code>@astrojs/internal-helpers</code><a href="https://github.com/0"><code>@0</code></a>.12.0</li> </ul> </li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/withastro/astro/blob/main/packages/markdown/remark/CHANGELOG.md">@astrojs/markdown-remark's changelog</a>.</em></p> <blockquote> <h2>7.3.2</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18099">#18099</a> <a href="https://github.com/withastro/astro/commit/69872618b7b7c915b2bd51a4b41e3a3e3116f3bb"><code>6987261</code></a> Thanks <a href="https://github.com/apps/renovate"><code>@renovate</code></a>! - Adds YAML parsing with timestamp and merge key support, and formats YAML errors consistently across Astro, Markdown, MDX, and Markdoc.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18139">#18139</a> <a href="https://github.com/withastro/astro/commit/d047b5c23c273d993470258a84bf71852889c76e"><code>d047b5c</code></a> Thanks <a href="https://github.com/breken-ai"><code>@breken-ai</code></a>! - Fixes Markdown code blocks with languages ending in a symbol, such as <code>c#</code>, <code>c++</code>, and <code>f#</code>, being highlighted as <code>c</code> or <code>f</code></p> </li> <li> <p>Updated dependencies [<a href="https://github.com/withastro/astro/commit/69872618b7b7c915b2bd51a4b41e3a3e3116f3bb"><code>6987261</code></a>, <a href="https://github.com/withastro/astro/commit/62b13ba3e0068057a47fbfc2ab8842b263c68f0d"><code>62b13ba</code></a>]:</p> <ul> <li><code>@astrojs/internal-helpers</code><a href="https://github.com/0"><code>@0</code></a>.12.0</li> </ul> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/withastro/astro/commit/e4f8f469e59ea4658eccea07b4674c83f0a07bbc"><code>e4f8f46</code></a> [ci] release (<a href="https://github.com/withastro/astro/tree/HEAD/packages/markdown/remark/issues/18120">#18120</a>)</li> <li><a href="https://github.com/withastro/astro/commit/d047b5c23c273d993470258a84bf71852889c76e"><code>d047b5c</code></a> fix(markdown): keep trailing symbols in code block languages (<a href="https://github.com/withastro/astro/tree/HEAD/packages/markdown/remark/issues/18139">#18139</a>)</li> <li>See full diff in <a href="https://github.com/withastro/astro/commits/@astrojs/markdown-remark@7.3.2/packages/markdown/remark">compare view</a></li> </ul> </details> <br /> Updates `@astrojs/starlight` from 0.42.5 to 0.42.6 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/withastro/starlight/releases">@astrojs/starlight's releases</a>.</em></p> <blockquote> <h2><code>@astrojs/starlight</code><a href="https://github.com/0"><code>@0</code></a>.42.6</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4252">#4252</a> <a href="https://github.com/withastro/starlight/commit/40a258492af4b2ee45159aa4a7ddb30c346acc0b"><code>40a2584</code></a> Thanks <a href="https://github.com/olafur-andri"><code>@olafur-andri</code></a>! - Adds Icelandic language support</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4229">#4229</a> <a href="https://github.com/withastro/starlight/commit/e4a3d82262d62677665cf2dd5ad9a1ba3ae2aa6a"><code>e4a3d82</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes a potential issue with icons being cut off in Firefox when pinch-zooming.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4226">#4226</a> <a href="https://github.com/withastro/starlight/commit/fb562dddae97add7f5997c1f7fffd4f60c9f147c"><code>fb562dd</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes an issue where pages not importing components from <code>@astrojs/starlight/components</code> included styles of Starlight components used on other pages.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4250">#4250</a> <a href="https://github.com/withastro/starlight/commit/531af7deb7dd164e5b97a49223a82b146e575fdc"><code>531af7d</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes <code>Failed to resolve dependency</code> warnings logged when running the development server in projects using the Cloudflare adapter.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4229">#4229</a> <a href="https://github.com/withastro/starlight/commit/e4a3d82262d62677665cf2dd5ad9a1ba3ae2aa6a"><code>e4a3d82</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes the <code>codePen</code> and <code>node</code> icons slightly extending beyond their bounding box.</p> </li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/withastro/starlight/blob/main/packages/starlight/CHANGELOG.md">@astrojs/starlight's changelog</a>.</em></p> <blockquote> <h2>0.42.6</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4252">#4252</a> <a href="https://github.com/withastro/starlight/commit/40a258492af4b2ee45159aa4a7ddb30c346acc0b"><code>40a2584</code></a> Thanks <a href="https://github.com/olafur-andri"><code>@olafur-andri</code></a>! - Adds Icelandic language support</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4229">#4229</a> <a href="https://github.com/withastro/starlight/commit/e4a3d82262d62677665cf2dd5ad9a1ba3ae2aa6a"><code>e4a3d82</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes a potential issue with icons being cut off in Firefox when pinch-zooming.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4226">#4226</a> <a href="https://github.com/withastro/starlight/commit/fb562dddae97add7f5997c1f7fffd4f60c9f147c"><code>fb562dd</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes an issue where pages not importing components from <code>@astrojs/starlight/components</code> included styles of Starlight components used on other pages.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4250">#4250</a> <a href="https://github.com/withastro/starlight/commit/531af7deb7dd164e5b97a49223a82b146e575fdc"><code>531af7d</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes <code>Failed to resolve dependency</code> warnings logged when running the development server in projects using the Cloudflare adapter.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4229">#4229</a> <a href="https://github.com/withastro/starlight/commit/e4a3d82262d62677665cf2dd5ad9a1ba3ae2aa6a"><code>e4a3d82</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes the <code>codePen</code> and <code>node</code> icons slightly extending beyond their bounding box.</p> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/withastro/starlight/commit/afe57bbbc254b957b969d581d0f861925035bdcf"><code>afe57bb</code></a> [ci] release (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4235">#4235</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/40a258492af4b2ee45159aa4a7ddb30c346acc0b"><code>40a2584</code></a> i18n(is): Add Icelandic UI translations (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4252">#4252</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/531af7deb7dd164e5b97a49223a82b146e575fdc"><code>531af7d</code></a> Fix dependency resolution warnings with the Cloudflare adapter (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4250">#4250</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/e4a3d82262d62677665cf2dd5ad9a1ba3ae2aa6a"><code>e4a3d82</code></a> Fix icons cut off when pinch-zooming in Firefox (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4229">#4229</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/fb562dddae97add7f5997c1f7fffd4f60c9f147c"><code>fb562dd</code></a> Fix components barrel file import in <code>\<Footer></code> (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4226">#4226</a>)</li> <li>See full diff in <a href="https://github.com/withastro/starlight/commits/@astrojs/starlight@0.42.6/packages/starlight">compare view</a></li> </ul> </details> <br /> Updates `astro` from 7.3.5 to 7.3.8 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/withastro/astro/releases">astro's releases</a>.</em></p> <blockquote> <h2>astro@7.3.8</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18293">#18293</a> <a href="https://github.com/withastro/astro/commit/28e74103fe3d999a56ae3404b5fe67a1ad6d8013"><code>28e7410</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>Astro.cache</code> being <code>undefined</code> when a custom 404 or 500 page is rendered by the error handler, for example after a request to an API route with an HTTP method the route doesn't export</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18298">#18298</a> <a href="https://github.com/withastro/astro/commit/0e9e85728999907127e817287dc0a0e3accdbe8e"><code>0e9e857</code></a> Thanks <a href="https://github.com/matthewp"><code>@matthewp</code></a>! - Fixes <code>astro add</code> removing existing <code>allowBuilds</code> approvals from <code>pnpm-workspace.yaml</code> with pnpm v11.0–v11.22</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18263">#18263</a> <a href="https://github.com/withastro/astro/commit/882dd98cd9f11c4e7bd0b812d37f865dfca75d3d"><code>882dd98</code></a> Thanks <a href="https://github.com/florian-lefebvre"><code>@florian-lefebvre</code></a>! - Refactors internal bundling and code transforms to use Vite's Oxc-based <code>transformWithOxc</code> and Rolldown instead of esbuild. These packages no longer depend on esbuild directly.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18290">#18290</a> <a href="https://github.com/withastro/astro/commit/31f13c3710f2c128d3e1684100e44022a598ffcf"><code>31f13c3</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes the <code>glob()</code> loader not reloading changed files in dev when the pattern starts with an extglob such as <code>!(drafts)/**/*.md</code></p> </li> </ul> <h2>astro@7.3.7</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18266">#18266</a> <a href="https://github.com/withastro/astro/commit/cba76cc8200890186acf26444d473ebac0fc2623"><code>cba76cc</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes a build error when a Markdown content collection entry loaded with <code>glob({ deferRender: true })</code> has a <code>layout</code> frontmatter property. <code>layout</code> is now ignored for content collection entries, as documented.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18287">#18287</a> <a href="https://github.com/withastro/astro/commit/38f6793291ea01a13cf4e51a83aeb16966a5a495"><code>38f6793</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>astro add cloudflare</code> failing to install dependencies with pnpm v11+ by approving the <code>workerd</code> build script, and shows the package manager's error output when <code>astro add</code> fails to install dependencies</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18222">#18222</a> <a href="https://github.com/withastro/astro/commit/fcf6ed6d4915eed6c18a20658b73372d074c4832"><code>fcf6ed6</code></a> Thanks <a href="https://github.com/mingjunlu"><code>@mingjunlu</code></a>! - Fixes an issue where AVIF images were served as <code>image/heif</code> instead of <code>image/avif</code> in the dev server.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18240">#18240</a> <a href="https://github.com/withastro/astro/commit/de4df060306ea4ad78db8438e06bc4640df60ef2"><code>de4df06</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes the <code>cache()</code> handler from <code>astro/hono</code> and <code>astro/fetch</code> throwing a <code>TypeError</code> when a cache provider is configured. It now registers the cache provider before rendering, so <code>Astro.cache</code> is available to downstream handlers like <code>pages()</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18268">#18268</a> <a href="https://github.com/withastro/astro/commit/547b572c65238e20a2fc1b03f6a8a5700035abc0"><code>547b572</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>security.checkOrigin</code> rejecting cross-origin requests with non-form content types such as <code>application/json</code>. As documented, the check only applies to unsafe requests that have no <code>content-type</code> header or one of <code>application/x-www-form-urlencoded</code>, <code>multipart/form-data</code>, or <code>text/plain</code>.</p> </li> </ul> <h2>astro@7.3.6</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18166">#18166</a> <a href="https://github.com/withastro/astro/commit/5134d0f9e7478f23b1a590fa2416a2469c62ee23"><code>5134d0f</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes an intermittent dev server crash when using <code>astro:actions</code> inside a server island with adapters that use a pre-bundled SSR environment (e.g. <code>@astrojs/cloudflare</code>)</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18076">#18076</a> <a href="https://github.com/withastro/astro/commit/8a2df6675aa62fea382bce1cdb30c4260e0f104b"><code>8a2df66</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes stale scoped styles during HMR when both markup and <code><style></code> are changed in a single save</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18252">#18252</a> <a href="https://github.com/withastro/astro/commit/2d29e7e38db65fcca7f241c967417003e20ecf43"><code>2d29e7e</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes CSS from other pages leaking into a page's <code><head></code> in dev when the page imports a module such as <code>astro:config/server</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18000">#18000</a> <a href="https://github.com/withastro/astro/commit/67245751e02fb94223266d3c55cc7d7ac65ab060"><code>6724575</code></a> Thanks <a href="https://github.com/barclayd"><code>@barclayd</code></a>! - Fixes a bug where server islands containing framework components rendered empty in the dev server when using a custom <code>src/fetch.ts</code></p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18241">#18241</a> <a href="https://github.com/withastro/astro/commit/7c5fd6f1faf4d87d0c9c5836ee47cc0d6d529ca3"><code>7c5fd6f</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes the composable <code>i18n()</code> handler from <code>astro/fetch</code> and <code>astro/hono</code> returning an empty 404 for paths without a locale prefix. It now renders the custom 404 page, matching <code>astro()</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18164">#18164</a> <a href="https://github.com/withastro/astro/commit/1a6997f280529650e4f1dacf0388e8fe07d05a1a"><code>1a6997f</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes CSS Module HMR in dev when a component is rendered both with and without hydration on the same page. Astro now uses path-based class name hashing in dev mode so that editing CSS declarations no longer changes the generated selectors, allowing Vite's CSS HMR to update styles without a full page reload.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18243">#18243</a> <a href="https://github.com/withastro/astro/commit/dd29d62b1e7bd071804f822e90361cf5c9784682"><code>dd29d62</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>context.props</code> being <code>null</code> in middleware and endpoints when the composable <code>astro/hono</code> or <code>astro/fetch</code> <code>actions()</code> handler runs before <code>middleware()</code>, or when <code>pages()</code> runs without <code>middleware()</code></p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18193">#18193</a> <a href="https://github.com/withastro/astro/commit/95d5d16ce983612e09b588bb249f76d273c872f7"><code>95d5d16</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>astro build</code> failing on Windows with Node.js 25+ with <code>ERR_INVALID_ARG_VALUE</code> when clearing the output directory hits a transient <code>EPERM</code> error</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18220">#18220</a> <a href="https://github.com/withastro/astro/commit/d6c13a48c682bb42da1eb295d520f9667035e1fb"><code>d6c13a4</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes type errors reported in Astro's built-in <code><Picture /></code> and <code><Font /></code> components when type-checking a project with <code>tsc</code> and <code>@astrojs/ts-content-mapper</code></p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18133">#18133</a> <a href="https://github.com/withastro/astro/commit/faac481dc86efdd2e4987069a7298f2aea3f1c6c"><code>faac481</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes lost request state when Vite discovers server dependencies during a request in Cloudflare dev mode</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18146">#18146</a> <a href="https://github.com/withastro/astro/commit/2af45163fb7757a533bdf929874278e0a7483cfc"><code>2af4516</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes CSS imported from an <code>injectScript('page')</code> script being dropped during build</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18159">#18159</a> <a href="https://github.com/withastro/astro/commit/e5f8fe0fcfd1c1845ae425cbf874864ce5ab5a37"><code>e5f8fe0</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes a hang when a <code>server:defer</code> component is inside a slot of another component in an MDX content collection entry</p> </li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/withastro/astro/blob/main/packages/astro/CHANGELOG.md">astro's changelog</a>.</em></p> <blockquote> <h2>7.3.8</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18293">#18293</a> <a href="https://github.com/withastro/astro/commit/28e74103fe3d999a56ae3404b5fe67a1ad6d8013"><code>28e7410</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>Astro.cache</code> being <code>undefined</code> when a custom 404 or 500 page is rendered by the error handler, for example after a request to an API route with an HTTP method the route doesn't export</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18298">#18298</a> <a href="https://github.com/withastro/astro/commit/0e9e85728999907127e817287dc0a0e3accdbe8e"><code>0e9e857</code></a> Thanks <a href="https://github.com/matthewp"><code>@matthewp</code></a>! - Fixes <code>astro add</code> removing existing <code>allowBuilds</code> approvals from <code>pnpm-workspace.yaml</code> with pnpm v11.0–v11.22</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18263">#18263</a> <a href="https://github.com/withastro/astro/commit/882dd98cd9f11c4e7bd0b812d37f865dfca75d3d"><code>882dd98</code></a> Thanks <a href="https://github.com/florian-lefebvre"><code>@florian-lefebvre</code></a>! - Refactors internal bundling and code transforms to use Vite's Oxc-based <code>transformWithOxc</code> and Rolldown instead of esbuild. These packages no longer depend on esbuild directly.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18290">#18290</a> <a href="https://github.com/withastro/astro/commit/31f13c3710f2c128d3e1684100e44022a598ffcf"><code>31f13c3</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes the <code>glob()</code> loader not reloading changed files in dev when the pattern starts with an extglob such as <code>!(drafts)/**/*.md</code></p> </li> </ul> <h2>7.3.7</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18266">#18266</a> <a href="https://github.com/withastro/astro/commit/cba76cc8200890186acf26444d473ebac0fc2623"><code>cba76cc</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes a build error when a Markdown content collection entry loaded with <code>glob({ deferRender: true })</code> has a <code>layout</code> frontmatter property. <code>layout</code> is now ignored for content collection entries, as documented.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18287">#18287</a> <a href="https://github.com/withastro/astro/commit/38f6793291ea01a13cf4e51a83aeb16966a5a495"><code>38f6793</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>astro add cloudflare</code> failing to install dependencies with pnpm v11+ by approving the <code>workerd</code> build script, and shows the package manager's error output when <code>astro add</code> fails to install dependencies</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18222">#18222</a> <a href="https://github.com/withastro/astro/commit/fcf6ed6d4915eed6c18a20658b73372d074c4832"><code>fcf6ed6</code></a> Thanks <a href="https://github.com/mingjunlu"><code>@mingjunlu</code></a>! - Fixes an issue where AVIF images were served as <code>image/heif</code> instead of <code>image/avif</code> in the dev server.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18240">#18240</a> <a href="https://github.com/withastro/astro/commit/de4df060306ea4ad78db8438e06bc4640df60ef2"><code>de4df06</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes the <code>cache()</code> handler from <code>astro/hono</code> and <code>astro/fetch</code> throwing a <code>TypeError</code> when a cache provider is configured. It now registers the cache provider before rendering, so <code>Astro.cache</code> is available to downstream handlers like <code>pages()</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18268">#18268</a> <a href="https://github.com/withastro/astro/commit/547b572c65238e20a2fc1b03f6a8a5700035abc0"><code>547b572</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>security.checkOrigin</code> rejecting cross-origin requests with non-form content types such as <code>application/json</code>. As documented, the check only applies to unsafe requests that have no <code>content-type</code> header or one of <code>application/x-www-form-urlencoded</code>, <code>multipart/form-data</code>, or <code>text/plain</code>.</p> </li> </ul> <h2>7.3.6</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18166">#18166</a> <a href="https://github.com/withastro/astro/commit/5134d0f9e7478f23b1a590fa2416a2469c62ee23"><code>5134d0f</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes an intermittent dev server crash when using <code>astro:actions</code> inside a server island with adapters that use a pre-bundled SSR environment (e.g. <code>@astrojs/cloudflare</code>)</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18076">#18076</a> <a href="https://github.com/withastro/astro/commit/8a2df6675aa62fea382bce1cdb30c4260e0f104b"><code>8a2df66</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes stale scoped styles during HMR when both markup and <code><style></code> are changed in a single save</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18252">#18252</a> <a href="https://github.com/withastro/astro/commit/2d29e7e38db65fcca7f241c967417003e20ecf43"><code>2d29e7e</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes CSS from other pages leaking into a page's <code><head></code> in dev when the page imports a module such as <code>astro:config/server</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18000">#18000</a> <a href="https://github.com/withastro/astro/commit/67245751e02fb94223266d3c55cc7d7ac65ab060"><code>6724575</code></a> Thanks <a href="https://github.com/barclayd"><code>@barclayd</code></a>! - Fixes a bug where server islands containing framework components rendered empty in the dev server when using a custom <code>src/fetch.ts</code></p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18241">#18241</a> <a href="https://github.com/withastro/astro/commit/7c5fd6f1faf4d87d0c9c5836ee47cc0d6d529ca3"><code>7c5fd6f</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes the composable <code>i18n()</code> handler from <code>astro/fetch</code> and <code>astro/hono</code> returning an empty 404 for paths without a locale prefix. It now renders the custom 404 page, matching <code>astro()</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18164">#18164</a> <a href="https://github.com/withastro/astro/commit/1a6997f280529650e4f1dacf0388e8fe07d05a1a"><code>1a6997f</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes CSS Module HMR in dev when a component is rendered both with and without hydration on the same page. Astro now uses path-based class name hashing in dev mode so that editing CSS declarations no longer changes the generated selectors, allowing Vite's CSS HMR to update styles without a full page reload.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18243">#18243</a> <a href="https://github.com/withastro/astro/commit/dd29d62b1e7bd071804f822e90361cf5c9784682"><code>dd29d62</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>context.props</code> being <code>null</code> in middleware and endpoints when the composable <code>astro/hono</code> or <code>astro/fetch</code> <code>actions()</code> handler runs before <code>middleware()</code>, or when <code>pages()</code> runs without <code>middleware()</code></p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18193">#18193</a> <a href="https://github.com/withastro/astro/commit/95d5d16ce983612e09b588bb249f76d273c872f7"><code>95d5d16</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>astro build</code> failing on Windows with Node.js 25+ with <code>ERR_INVALID_ARG_VALUE</code> when clearing the output directory hits a transient <code>EPERM</code> error</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18220">#18220</a> <a href="https://github.com/withastro/astro/commit/d6c13a48c682bb42da1eb295d520f9667035e1fb"><code>d6c13a4</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes type errors reported in Astro's built-in <code><Picture /></code> and <code><Font /></code> components when type-checking a project with <code>tsc</code> and <code>@astrojs/ts-content-mapper</code></p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18133">#18133</a> <a href="https://github.com/withastro/astro/commit/faac481dc86efdd2e4987069a7298f2aea3f1c6c"><code>faac481</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes lost request state when Vite discovers server dependencies during a request in Cloudflare dev mode</p> </li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/withastro/astro/commit/3571e2d2e80a66764254fa9b7750704a150ca3f6"><code>3571e2d</code></a> [ci] release (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18292">#18292</a>)</li> <li><a href="https://github.com/withastro/astro/commit/0e9e85728999907127e817287dc0a0e3accdbe8e"><code>0e9e857</code></a> Keep existing pnpm allowBuilds approvals in astro add (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18298">#18298</a>)</li> <li><a href="https://github.com/withastro/astro/commit/882dd98cd9f11c4e7bd0b812d37f865dfca75d3d"><code>882dd98</code></a> Replace esbuild with Vite and Rolldown APIs (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18263">#18263</a>)</li> <li><a href="https://github.com/withastro/astro/commit/28e74103fe3d999a56ae3404b5fe67a1ad6d8013"><code>28e7410</code></a> fix(astro): provide Astro.cache when rendering error pages (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18293">#18293</a>)</li> <li><a href="https://github.com/withastro/astro/commit/31f13c3710f2c128d3e1684100e44022a598ffcf"><code>31f13c3</code></a> Fix glob() loader watcher ignoring patterns starting with an extglob like `!(...</li> <li><a href="https://github.com/withastro/astro/commit/25c19fa3ce8b5044efa246b7c2d1e50e8e8cffcf"><code>25c19fa</code></a> [ci] release (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18272">#18272</a>)</li> <li><a href="https://github.com/withastro/astro/commit/38f6793291ea01a13cf4e51a83aeb16966a5a495"><code>38f6793</code></a> fix(astro): approve workerd builds in <code>astro add cloudflare</code> for pnpm v11+ an...</li> <li><a href="https://github.com/withastro/astro/commit/547b572c65238e20a2fc1b03f6a8a5700035abc0"><code>547b572</code></a> Restore content-type gate in security.checkOrigin so JSON requests are not bl...</li> <li><a href="https://github.com/withastro/astro/commit/fcf6ed6d4915eed6c18a20658b73372d074c4832"><code>fcf6ed6</code></a> fix(assets): return requested format from Sharp transform (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18222">#18222</a>)</li> <li><a href="https://github.com/withastro/astro/commit/bec7d186681597264814ade73bb365023c94d1bf"><code>bec7d18</code></a> Ignore <code>layout</code> frontmatter in Markdown content collection entries with `defe...</li> <li>Additional commits viewable in <a href="https://github.com/withastro/astro/commits/astro@7.3.8/packages/astro">compare view</a></li> </ul> </details> <br /> Updates `playwright` from 1.63.0 to 1.64.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/microsoft/playwright/releases">playwright's releases</a>.</em></p> <blockquote> <h2>v1.64.0</h2> <h2>🧰 WebMCP</h2> <p>New <a href="https://playwright.dev/docs/api/class-page#page-webmcp">page.webmcp</a> and <a href="https://playwright.dev/docs/api/class-frame#frame-webmcp">frame.webmcp</a> give access to the tools that a page registers through the experimental <a href="https://playwright.dev/docs/api/class-webmcp">WebMCP</a> browser API, so you can test them like any other part of your app:</p> <pre lang="js"><code>const browser = await chromium.launch({ args: ['--enable-features=WebMCP'] }); const page = await browser.newPage(); await page.goto('https://example.com'); <p>for (const tool of await page.webmcp.tools()) console.log(tool.name, tool.description);</p> <p>const result = await page.webmcp.callTool('add', { a: 2, b: 40 }); console.log(result.content[0].text); // "42" </code></pre></p> <p><a href="https://playwright.dev/docs/getting-started-mcp">Playwright MCP</a> also supports WebMCP by default, with page-defined tools offered to the agent as <code>webmcp_<tool></code>. Pass <code>--no-webmcp</code> to opt out.</p> <p><a href="https://playwright.dev/docs/getting-started-cli"><code>playwright-cli</code></a> exposes them as well:</p> <pre lang="bash"><code>playwright-cli webmcp-list playwright-cli webmcp-call search_catalog --params '{"query":"cats"}' </code></pre> <h2>🎬 Better videos</h2> <p>Videos can now be recorded at a custom frame rate, and the decorations for actions are styled with plain CSS:</p> <pre lang="js"><code>// playwright.config.ts import { defineConfig } from '@playwright/test'; <p>export default defineConfig({ use: { video: { mode: 'on', size: { width: 1920, height: 1080 }, fps: 60, show: { actions: { style: { point: 'width: 20px; height: 20px; border-radius: 50%; background: red', highlight: 'outline: 2px solid <a href="https://redirect.github.com/microsoft/playwright/issues/333">#333</a>; background: rgba(0, 128, 255, .15)', title: 'font-size: 16px', }, }, }, }, </tr></table> </code></pre></p> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/microsoft/playwright/commit/606ecd8b34bac100db32561b6278ffd76e5eb3cd"><code>606ecd8</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43192">#43192</a>): fix(locators): parse locators the way the client API bui...</li> <li><a href="https://github.com/microsoft/playwright/commit/e4f872c79530583300185d3e4aa9689e2f85d0b0"><code>e4f872c</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43188">#43188</a>): feat(api): expose asLocatorDescription via LocalUtils fo...</li> <li><a href="https://github.com/microsoft/playwright/commit/f6a439e6f496f75d8e8b687116eef8c21316aa1f"><code>f6a439e</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43189">#43189</a>): docs(webmcp): expose WebMCP to all languages</li> <li><a href="https://github.com/microsoft/playwright/commit/e2335c30f16196a96f81c099598803ca74f9120c"><code>e2335c3</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43174">#43174</a>): fix(mcp): do not close the browser twice when the client...</li> <li><a href="https://github.com/microsoft/playwright/commit/d2a436e0111091ba99836fa6711de28201606cfc"><code>d2a436e</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43163">#43163</a>): Revert "fix(blob): do not remove existing reports from o...</li> <li><a href="https://github.com/microsoft/playwright/commit/a0c4b5efc965577e19f5ebfdcc27f384d3058783"><code>a0c4b5e</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43175">#43175</a>): feat(api): return language-specific locator code from re...</li> <li><a href="https://github.com/microsoft/playwright/commit/3f7d535c7b69ff1997307dc304c3c8c76b51179d"><code>3f7d535</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43131">#43131</a>): docs: fix broken C# samples in API docs and handles guide</li> <li><a href="https://github.com/microsoft/playwright/commit/1cde64f74a0f85304f2f4091a46670bf9a3e0dc3"><code>1cde64f</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43170">#43170</a>): fix(locators): parse mixed role options</li> <li><a href="https://github.com/microsoft/playwright/commit/8851e7296508ae50cd1f822e50d1e4fa92eab218"><code>8851e72</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43171">#43171</a>): fix(locators): parse JavaScript escapes and regex classes</li> <li><a href="https://github.com/microsoft/playwright/commit/dcc50654872510b630c73ec6eba1fb3d625c735e"><code>dcc5065</code></a> cherry-pick(<a href="https://redirect.github.com/microsoft/playwright/issues/43172">#43172</a>): fix(locator): parse within and getByRef locators</li> <li>Additional commits viewable in <a href="https://github.com/microsoft/playwright/compare/v1.63.0...v1.64.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
34eb6252db |
docs(config): name every supported forge and opencode in help text (#4439)
The help text for three features named only the original subset of what
the code supports. This updates the `after_long_help` sources and
regenerates the doc pages, skill mirrors, and help snapshots from them.
- **`wt config show --full`** said it checks whether `gh` or `glab` is
installed and authenticated. `render_diagnostics` in
`src/commands/config/show.rs` checks the CLI for the repository's forge,
which can also be `tea` (Gitea) or `az` (Azure DevOps). The text now
names all four.
- **First-run LLM offer** listed `claude` and `codex` as detected tools.
`detect_llm_tool_with` in `src/output/commit_generation.rs` also detects
`opencode`.
- **CI status** was described as "GitHub/GitLab" in the `wt config state
get` and `wt config state cache` help and in `wt list`'s Full mode
paragraph. CI status also covers Gitea and Azure DevOps
(`src/commands/list/ci_status/{gitea,azure}.rs`), so these now say
"forge CI".
No tests added: only help text changed. `test_docs_are_in_sync` and the
`help` snapshot tests pass locally.
---------
Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com>
|
||
|
|
61b2609f18 | docs: drop references to the removed gh auth status gate and CAS tail (#4468) | ||
|
|
f98bd11816 |
fix(list): leave CI blank when the forge CLI isn't logged in (#4449)
Since #4436, any failed forge call shows ⚠. That includes a CLI that is installed but not logged in, which then puts a permanent ⚠ in `wt list --full`, the shell prompt, and the Claude Code statusline. This change leaves the cell blank when the CLI holds no login for the forge's host, and keeps ⚠ for a failure from a CLI that does (offline, rate limit, expired token). Each CLI answers from its own local state, so a lost connection never reads as logged out: - **GitHub**: `gh` exits with its documented code 4 when it has no login for the host it resolved for the request. The backend reads that exit code, so SSH host aliases resolve the way `gh` resolves them. - **GitLab / Gitea / Azure DevOps**: after a failed call, `remote_ref::is_authed_for(forge, host)` asks `glab config get token --host`, `tea logins list --output json`, or `az account show`, for the `forge.hostname` if configured, else the remote's host. The answer is cached per forge and host for the process. `wt config show --full` uses the same check for the repo's host and names that host in its warning. It replaces `CiToolsStatus`, which probed all four CLIs to report one, and asked `gh auth status` / `glab auth status`, which contact the server and accept a login for any host. `tea`'s host-agnostic `has_any_login` is gone with it. Behavior changes: - `wt list --full` / statusline: a CLI with no login for the host leaves the CI cell blank instead of ⚠. The legend now lists that under blank, and ⚠'s examples say "expired login". - `wt config show --full`: a login for another host no longer counts, and the warning says which host it checked (`gh installed but not authenticated for github.com`). Known limits: a GitLab or Gitea remote through an SSH host alias is checked under the alias, so a failure there shows blank unless `forge.hostname` names the real host; Azure DevOps counts only an `az login`, not a PAT from `az devops login`. Tests: the failed-list test now covers logged-in and logged-out cases for `gh` (exit 1 vs 4) and `glab` (token vs none); the `tea` CI mocks hold a login for the test host; the `tea` login-discovery test adds a login for another host. Follows #4436. > _This was written by Claude Code on behalf of max-sixty_ Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
397136ea31 |
refactor: stop refining failed forge calls and missing nu/pwsh (#4436)
Applies `AGENTS.md`'s **Other Tools Own Their Conventions** (#4435) to what #4106 left: where worktrunk refined how it handles a case outside standard use, stop handling the case. **CI status: a failed forge call shows the error indicator.** The classifier that searched `gh`/`glab`/`az`/`tea` output for English phrases ("rate limit", "403", "connection", …) to choose between ⚠ and a blank "no CI" cell is deleted. Any failed call now shows ⚠. Gitea reads only whether the HTTP status is an error, not which one. The two lookups by commit SHA (GitHub check runs, Gitea combined status) now run only when some remote-tracking ref contains the head, since the forge answers a commit it doesn't have with an error and ordinary unpushed work would otherwise show ⚠. GitLab and Azure look pipelines up by branch and are unchanged. **PowerShell on Unix.** When `pwsh` can't be queried there is no PowerShell profile, rather than a guessed `~/.config/powershell` one (left by #4422). **Nushell.** When `nu` can't be queried there are no autoload candidates, rather than a reconstruction of Nushell's data-dir rule. Install can't write into a legacy directory, since the candidate list is empty. Behavior changes: - `gh`/`glab`/`az` installed but not logged in now shows ⚠ under `wt list --full` instead of a blank cell. Detection checks that the tool is installed, and `wt config show` reports that it isn't logged in. The ⚠ legend now names "not logged in". - A Gitea 404 shows ⚠. - `wt config shell install powershell` (or `nu`) without the tool fails with "No shell config files found", and uninstall no longer finds a wrapper left behind after `nu` was removed. **Fish's completion path.** `Shell::completion_path` answered for every shell, but only fish installs a completion file; its other arms, including the Nushell one this change touched, were dead. `shell::fish_completion_path` replaces it. Tests: the retriable-classifier unit tests are gone, and the Gitea test that only distinguished a blanked 500 body. Mocks now answer for branches other than the one under test, since those would otherwise show ⚠. New tests: a failed `gh pr list` / `glab mr list` shows ⚠; an unpushed head skips the GitHub and Gitea lookups by SHA, each with a pushed control. Shell unit tests and the PowerShell integration tests no longer depend on a real `nu` or `pwsh`; they pass with only `/usr/bin:/bin` on `PATH`. Full integration and unit suites pass locally. Ref #4106. > _This was written by Claude Code on behalf of max-sixty_ --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
3c7cac7044 | docs(extending): add wt-tui to the custom subcommand examples (#4386) | ||
|
|
824bec6a14 | docs(llm-commits): bump the OpenCode commit-generation model to Claude Haiku 5.5 (#4432) | ||
|
|
59501986af |
fix: parse remote URLs with gix-url so IPv6 hosts and SSH ports get distinct project identifiers (#4421)
`GitRemoteUrl::parse` split SSH authorities at the first `:`, so `ssh://git@[2001:db8::1]/owner/repo.git` and `ssh://git@[2001:db8::2]/owner/repo.git` both became `[2001/owner/repo`. Because that identifier selects both saved approvals and `[projects]` settings, the two servers shared them. The parser also dropped explicit SSH ports, merging servers on different ports. The parser now delegates transport syntax to `gix-url` 0.40, and the identity keeps the full IPv6 host and any non-default SSH port. What changes: - **Syntax from `gix-url`.** It handles scheme, SCP form, userinfo (split at the final `@` of the authority, which is the host git connects to), IPv6 literals and ports. Worktrunk still owns the namespace/repo split and the forge policy. HTTP(S), git and SSH remotes are accepted, plus SCP when it has a non-empty user (the existing rule). Remote helpers, `file://`, local paths, option-like hosts and out-of-range ports are rejected. - **Escaped paths.** The path comes from `original_path()`, not the decoded `path`, so `evil%2Frepo` stays a single segment in SSH, SCP and git forms, as it already did for HTTPS. - **IPv6 hosts** are always bracketed (`[2001:db8::1]`), since `gix-url` strips the brackets for SSH but keeps them for HTTP(S). - **SSH ports.** A new `ssh_port` field goes into `project_identifier()` (`host:2222/owner/repo`) but not into `host()`, which feeds web and API URLs; an SSH port is not the web port. An explicit `:22` is treated as no port. HTTP(S) and git keep their explicit port in `host()`, as before. - **No new identity API.** `project_identifier()` is still the only identity; there is no separate one. Approvals and settings: the ordinary forms of one project still share an identifier (`git@host:o/r`, `ssh://git@host/o/r`, `ssh://git@host:22/o/r`, `https://host/o/r`). Corrected identities get fresh keys, so old IPv6-truncated or port-merged approvals don't carry over. The same applies to `[projects]` settings: a user on `ssh://…:2222` with a `[projects."host/o/r"]` entry needs to re-key it to `host:2222/o/r`. Nothing warns about this. The config docs now say that a non-default port stays with the host. Smaller identifier changes from delegating normalization: - DNS-style hostnames are lowercased (`GitHub.com` → `github.com`). - `git+ssh://` and `ssh+git://` now parse; before, they fell back to the raw-URL identifier. - Some inputs `gix-url` rejects now fall back to the raw-URL identifier in `Repository::project_identifier`: URLs containing whitespace, and SCP `user@[ipv6]:path`. Each still gets a distinct identifier. Tests: - New unit tests cover the IPv6 collision, port isolation (including a port inside hostile userinfo), escaped paths across transports, and rejected forms. - `tests/integration_tests/repository.rs` checks that `Repository::project_identifier` keeps the two IPv6 remotes apart. It also checks that `Approvals::is_command_approved` and `UserConfig::worktree_path_for_project` pick the right entry for port 2222 versus the shared SSH/HTTPS identifier. - The full lib and integration suites pass locally, except for tests that bind Unix sockets or sign commits. Those fail the same way on `main` in this sandbox. - Binary size was not measured; the issue's ~84 KiB figure is a standalone probe. Closes #4418 — automated triage --------- Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
86674a2d1f | feat(switch): add [switch.picker] preview setting to open the picker list-only (#4428) | ||
|
|
5b0930f09b | Add branch-addressed merge with --branch (#4360) | ||
|
|
c98f5f5028 |
docs(shell): make config shell help the setup home (#4344)
`wt config shell --help` provides setup, activation and current-shell diagnostics. The generated config reference now includes the existing init/install/uninstall help; the specialist shell-integration guide links to those recipes while retaining installed-file locations, warnings, wrapper internals and public anchors. This consolidates the authored recipes and expands the reference. Of +754/−183 lines across 11 files, +624 come from three generated config-reference copies. Authored Rust help changes are +40/−12. Latest main `913ff0547` is integrated, preserving Nushell’s newer 0.113+ requirement. Fresh documentation sync, Astro build and all 16 built-site checks pass. The current candidate passed the full project gate: 5,196 tests passed and one skipped, with Clippy, formatting, lockfile and doctest checks passing. The built binary’s help was reviewed at 80 columns. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
501d017274 |
refactor(config): read system config from one fixed path per platform (#4169)
System config is now read from one fixed path per platform, and `XDG_CONFIG_DIRS` is no longer consulted. The location is `WORKTRUNK_SYSTEM_CONFIG_PATH` when set, otherwise: - macOS: `/Library/Application Support/worktrunk/config.toml` - Windows: `%PROGRAMDATA%\worktrunk\config.toml` - other Unix: `/etc/xdg/worktrunk/config.toml` This PR started as a filter for relative `XDG_CONFIG_DIRS` entries (#4106, item 4). Removing the search path removes that case without a filter, and git's `--system` file is a fixed path for the same reason. `system_config_path()` now returns the location whether or not the file exists, so `default_system_config_path()`, which repeated the lookup order for the `wt config show` hint, is deleted, along with `system_config_dirs()`, `platform_default_dirs()`, the three `XDG_CONFIG_DIRS` tests and the env-var docs row. Behavior changes: directories listed in `XDG_CONFIG_DIRS` are no longer searched (common values such as NixOS's, Ubuntu's and Flatpak's already include `/etc/xdg`), and macOS no longer falls back to `/etc/xdg` after `/Library/Application Support`. > _This was written by Claude Code on behalf of max-sixty_ --------- Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> Co-authored-by: worktrunk-bot <worktrunk-bot@users.noreply.github.com> Co-authored-by: Maximilian Roos <m@maxroos.com> Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
7ac07ecf67 |
docs: require full release documentation review (#4412)
Require an independent review of every documentation change since the previous release, including changes already on main and edits arriving during release preparation. Review purpose and proportion before clarity, accuracy, examples, links, and rendered context; verify corrections and block tagging on unresolved findings. Apply the 0.81.0 review's source corrections: remove implementation exposition, repair the bare-repo navigation example, clarify merge hook timing and branch-only removal JSON, and include squash backups in the metadata inventory. Canonical help, generated pages, shipped skill mirrors, and help snapshots remain synchronized. Candidate-only release-note edits stay with the release PR. Validation: independent source, workflow, and rendered-page reviews; project pre-merge gate (5,208 tests, lint, Rustdoc, and doctests); documentation sync, 56 help cases, both site builds, and 16 built-site checks. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
62b82ae923 |
Explain discarded changes and provide safe squash recovery (#4347)
Removing a dirty worktree recommends `git stash -u` when untracked files need preserving. Forced removal lists the changes it will discard from a fresh inventory after approved pre-remove hooks. An unreadable index produces Git’s diagnostic and still permits forced removal; SIGINT and SIGTERM cancel before deletion and stop the remaining batch through the existing native cancellation path. Squashing staged work prints the backup ref and a command to recover its exact saved commit in a new worktree. Recovery preserves current branches, staging, and unstaged or untracked files. Git continues to own the backup and reflog. Validated against main `913ff0547`: the required pre-merge gate passed 5,208 tests with one skipped, including forced-removal disclosure, corrupt-index diagnostics, native cancellation, and executed recovery commands. Formatting, Clippy, documentation sync and doctests pass. Independent source/caller review found no remaining issues. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
913ff0547b |
chore: bump sharp from 0.35.4 to 0.35.5 in /docs (#4392)
Bumps [sharp](https://github.com/lovell/sharp) from 0.35.4 to 0.35.5. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/lovell/sharp/releases">sharp's releases</a>.</em></p> <blockquote> <h2>v0.35.5</h2> <p><a href="https://github.com/lovell/sharp-libvips/releases/tag/v1.3.4">https://github.com/lovell/sharp-libvips/releases/tag/v1.3.4</a></p> <ul> <li> <p>Add upper bounds check on length of <code>linear</code> and GIF <code>delay</code> arrays.</p> </li> <li> <p>Improve error handing when WebAssembly fallback also fails. <a href="https://redirect.github.com/lovell/sharp/pull/4593">#4593</a> <a href="https://github.com/lazerg"><code>@lazerg</code></a></p> </li> <li> <p>TypeScript: Allow multi-frame options for JXL output. <a href="https://redirect.github.com/lovell/sharp/pull/4602">#4602</a> <a href="https://github.com/ramin-010"><code>@ramin-010</code></a></p> </li> <li> <p>TypeScript: Remove non-existent named export. <a href="https://redirect.github.com/lovell/sharp/issues/4604">#4604</a></p> </li> <li> <p>Increase accepted dimensions when extending an image. <a href="https://redirect.github.com/lovell/sharp/issues/4605">#4605</a></p> </li> <li> <p>Improve gain map support for <code>extract</code> and <code>rotate</code> operations. <a href="https://redirect.github.com/lovell/sharp/issues/4606">#4606</a></p> </li> <li> <p>Tests: Ensure composite tests pass on big endian platforms. <a href="https://redirect.github.com/lovell/sharp/issues/4609">#4609</a></p> </li> </ul> <h2>v0.35.5-rc.1</h2> <p><a href="https://github.com/lovell/sharp-libvips/releases/tag/v1.3.4-rc.1">https://github.com/lovell/sharp-libvips/releases/tag/v1.3.4-rc.1</a></p> <ul> <li> <p>Add upper bounds check on length of <code>linear</code> and GIF <code>delay</code> arrays.</p> </li> <li> <p>Improve error handing when WebAssembly fallback also fails. <a href="https://redirect.github.com/lovell/sharp/pull/4593">#4593</a> <a href="https://github.com/lazerg"><code>@lazerg</code></a></p> </li> <li> <p>TypeScript: Allow multi-frame options for JXL output. <a href="https://redirect.github.com/lovell/sharp/pull/4602">#4602</a> <a href="https://github.com/ramin-010"><code>@ramin-010</code></a></p> </li> <li> <p>TypeScript: Remove non-existent named export. <a href="https://redirect.github.com/lovell/sharp/issues/4604">#4604</a></p> </li> <li> <p>Increase accepted dimensions when extending an image. <a href="https://redirect.github.com/lovell/sharp/issues/4605">#4605</a></p> </li> <li> <p>Improve gain map support for <code>extract</code> operation. <a href="https://redirect.github.com/lovell/sharp/issues/4606">#4606</a></p> </li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/lovell/sharp/commit/51a990faa26ade5586a4934ac9673c98d8893326"><code>51a990f</code></a> Release v0.35.5</li> <li><a href="https://github.com/lovell/sharp/commit/96de105d9d36ab04c76c2b78b97255171630d236"><code>96de105</code></a> Upgrade to sharp-libvips v1.3.4</li> <li><a href="https://github.com/lovell/sharp/commit/3a61390260e0aa017046af9ad107abd62f3c98c0"><code>3a61390</code></a> CI: Configure Dependabot with all package.json locations</li> <li><a href="https://github.com/lovell/sharp/commit/4940c500a63a9193b1ad5d3804a2d241ca36995b"><code>4940c50</code></a> Improve gain map support for rotate/flip/flop ops</li> <li><a href="https://github.com/lovell/sharp/commit/20654aa60eaa85a37369ef69a7ca6506b65f8c85"><code>20654aa</code></a> Prerelease v0.35.5-rc.1</li> <li><a href="https://github.com/lovell/sharp/commit/ef4f9348a97053ceddacd23dcb6e39cce5a1fc7d"><code>ef4f934</code></a> CI: Upgrade to Ubuntu 26.04</li> <li><a href="https://github.com/lovell/sharp/commit/358df954c5f58487392e1a9af743e112e8998d67"><code>358df95</code></a> Upgrade to libvips v8.18.7</li> <li><a href="https://github.com/lovell/sharp/commit/49f4903d34eddcd68b79872c511c198f124885a3"><code>49f4903</code></a> Improve gain map support for rotate-then-extract <a href="https://redirect.github.com/lovell/sharp/issues/4606">#4606</a></li> <li><a href="https://github.com/lovell/sharp/commit/0e2e55eb3a44da5d602adedd6b51a03e652e3b20"><code>0e2e55e</code></a> Silence a couple of compiler/static analysis warnings</li> <li><a href="https://github.com/lovell/sharp/commit/cef3b8c467c21f7e84bd51d5e53f2d115669f8d8"><code>cef3b8c</code></a> Improve gain map support for extract operation <a href="https://redirect.github.com/lovell/sharp/issues/4606">#4606</a></li> <li>Additional commits viewable in <a href="https://github.com/lovell/sharp/compare/v0.35.4...v0.35.5">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/max-sixty/worktrunk/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
8ad92229a3 |
fix(demos): pass the build target to parallel demo recordings (#4407)
`docs/demos/build` recorded the wrong output whenever it took its parallel path, which it does for any run with more than one non-TUI demo unless `--sequential` is passed. #4178 added a positional `target` parameter to `record_demo`, but only the sequential call site was updated. The `executor.submit(...)` call still passed `args.text` and `args.snapshot` in the old positions, so: - `./build docs --snapshot` wrote `.txt` text output instead of updating `docs/demos/snapshots/*.snap`, because `snapshot_mode` was always `False`. - `./build docs --text` recorded GIFs. - A plain GIF run passed `target=False` to checkpoint validation. The parallel call now passes `target`. Both call sites pass `text_mode=` and `snapshot_mode=` by keyword, so the next positional parameter can't shift them. There's no regression test: the script drives VHS and has no test harness in this repo. The sequential call site, which already passed `target`, shows the intended argument order. I checked the edit by parsing the script; it hasn't been run end to end. Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
cd6732e93a |
fix: preserve native foreground job control (#4400)
Foreground hooks could hang when they changed terminal settings: Worktrunk created a separate process group without giving it the terminal, so the kernel stopped the child with SIGTTOU. Foreground commands now stay in the caller's native job group, consistently for single and concurrent commands. Terminal access, Ctrl-C and job suspension follow the shell's native behavior. ### Design - `signal_forwarder` owns foreground cancellation and child admission. Native SIGINT/SIGTERM deaths stop later hooks and worktree steps; a child that catches Ctrl-C keeps its ordinary exit semantics, including exit code 130. SIGTERM addressed to wt cancels its owned work even when a child catches it. - `shell_exec` and concurrent output share that lifecycle. Output drains stop on cancellation; complete buffered stdin uses an anonymous temporary file instead of writer threads. Real process pipelines remain pipes. Buffered stdin therefore requires temporary storage and is seekable. - Help and preview pagers use Git's pager selection and the same process primitives. Interactive pager cancellation propagates silently, and preview deadlines cover output and child waits. - Shell wrappers apply directory directives and clean temporary files while preserving native interrupt behavior. Nushell integration now requires 0.113 or newer and uses native `finally` cleanup. Nushell 0.116's `finally` itself can abort a noninteractive script after Ctrl-C even when the child catches it and exits successfully. Worktrunk's directory change and cleanup still complete; the same script-continuation difference reproduces in a minimal Nushell `try/finally` without Worktrunk. Bash applies aborted-line cleanup through a writable `PROMPT_COMMAND`. With a readonly prompt command or `set -a`, it applies ordinary cleanup while preserving that configuration; Ctrl-C can leave the pending directory directive unapplied. The main behavioral coverage uses real children and PTYs: terminal ownership/settings, raw and caught Ctrl-C, PID-targeted cancellation, stopped jobs, concurrent output, pagers, and generated shell wrappers. Module contracts describe ownership and platform differences. ### Validation The complete project pre-merge gate passes locally, including the real-shell/PTY suite, Clippy, formatting, locked dependencies, and documentation checks. The change also received an independent Opus correctness and simplicity review, with fixes reviewed through convergence. macOS runtime validation is local; Linux and Windows run in CI. Closes #4389. Thanks to @user753 for the reproduction. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
e4a25d6e37 | feat(hooks)!: connect foreground hooks to the terminal (#3129) | ||
|
|
cd5d51dbd5 |
test(docs): serve a local stand-in for the shields.io badge in browser tests (#4383)
`publish-docs` [run 37425036753](https://github.com/max-sixty/worktrunk/actions/runs/37425036753) failed on `desktop code examples fit the content column` with `page.goto: Timeout 30000ms exceeded ... waiting until "load"` on `/`. That timeout is a side effect of #4382, which switched every browser-test navigation from `domcontentloaded` to `load`. Every page header loads the GitHub-stars badge from `img.shields.io` ([`SocialIcons.astro`](https://github.com/max-sixty/worktrunk/blob/220e59ef641ad34d770143959ed103e541275264/docs/src/components/SocialIcons.astro#L8)), so `load` now also waits on that third-party host. One slow badge response stalls the navigation. **Fix.** A `newPage` helper in `docs/tests/browser-site.test.mjs` routes `https://img.shields.io/**` to a local SVG sized to the badge's declared 90×20, and all five page-creation sites use it. That leaves the local server and the Google web fonts as the only things `load` waits for. The fonts have to stay real, because the layout assertions measure text set in JetBrains Mono. Analytics doesn't load on `127.0.0.1` (it's gated on `hostname === 'worktrunk.dev'`), and the docs content has no other remote images. **Verification.** I ran a local Chromium probe against the built site, routing the badge to a request that never answers: - With the stalled badge, `page.goto(..., { waitUntil: 'load' })` times out, which is the same failure as in CI. - With the stand-in, `/` loads in about 200 ms. The JetBrains Mono faces in use report `loaded` after `fonts.ready`, and the badge renders at 90×20. I couldn't run the WebKit suite locally because it needs sudo-installed system libraries. This PR's `check-docs` job runs it. Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
dc97142974 |
test(docs): wait for web fonts before browser layout checks (#4382)
The `link-check` job on [nightly run 37414713723](https://github.com/max-sixty/worktrunk/actions/runs/37414713723) failed `desktop code examples fit the content column` with `/claude-code/ wt list scrolls horizontally at 1401px`. The docs content at that commit is identical to `3e233ef26`, where `publish-docs` ran the same suite green a few hours earlier, so this was a race in the test rather than a site regression. **Cause.** The browser tests measure layout right after `DOMContentLoaded`. At that point the JetBrains Mono faces, which `custom.css` loads from Google Fonts with `display=swap`, are still `loading`, so code renders in the fallback monospace face. Since #4214, the content column is sized for exactly 99 columns of JetBrains Mono (0.6em, or 8.4px at 14px). On the Ubuntu runner the fallback is DejaVu Sans Mono at about 8.43px, roughly 2.8px wider across 99 columns. That is more than the test's 1px tolerance, so the result depends on whether the font swap has happened by the time the test measures. **Fix.** All test navigations now go through an `openPage` helper that waits for `load` and then `document.fonts.ready`, so every layout assertion measures the settled page. The helper covers every call site because the mobile, copy-button, and contrast tests take the same unsettled measurement. **Verification.** In a local Chromium probe of the built site: - At `DOMContentLoaded`, the JetBrains Mono faces report `loading`, and the `wt list` block measures the same as it does with Google Fonts blocked. - After `load` plus `fonts.ready`, the faces report `loaded`. I couldn't run WebKit here because it needs system libraries that require sudo. Chromium's headless shell rounds glyph advances to whole pixels, so its geometry numbers don't stand in for WebKit's. This PR's `check-docs` job runs the WebKit suite and is the real check. Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
3e233ef266 |
chore: bump smol-toml from 1.8.0 to 1.9.0 in /docs (#4379)
Bumps [smol-toml](https://github.com/squirrelchat/smol-toml) from 1.8.0 to 1.9.0. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/squirrelchat/smol-toml/releases">smol-toml's releases</a>.</em></p> <blockquote> <h2>v1.9.0</h2> <p><strong>Huge update</strong>!!! This is most likely the largest update the library received since its release, with lots of new features and improvements.</p> <h3>Performance improvements</h3> <p>Significant parts of the internal parse logic have been rewritten, improving performance by <strong>1.5x-2x</strong>. The library was already comfortably ahead of the others, but it is now faster than ever, sitting at <strong>4x faster parse performance</strong> than the closest maintained implementation.</p> <p>Problematic code paths have also been replaced by safer implementations, solving potential DoS vectors. See GHSA-r4xh-jqrq-34v2.</p> <p>Note: the objects returned by the library now have a <em>null prototype</em>. This is a transparent change for 99.9% of users, and is one of the most significant contributors to the major performance gains in this version.</p> <h3>Full Temporal support</h3> <p>Version 1.8.0 brought support for Temporal in <code>stringify</code>; now the library is also able to emit Temporal objects instead of its own ad-hoc <code>TomlDate</code> object. It is not enabled by default, but it will become the default in v2. Enable by setting <code>useLegacyDate: false</code> in the parser's options.</p> <h4>Better Temporal support in stringify</h4> <p>Temporal support has been improved since it released: Temporal objects that cannot be represented (such as <code>Temporal.PlainMonthDay</code>) now throw an error (instead of silently emitting a bogus object).</p> <p>A new option has been added to <code>stringify</code> to disallow Temporal objects that cannot be fully represented in TOML. This includes <code>ZonedDateTime</code> objects with a IANA timezone attached instead of a plain offset, and dates with a specific calendar value set. Enable by setting <code>strictTemporal: true</code> in the options.</p> <h3>Handling of unsafe keys</h3> <p>Since its release the library has been protected against prototype pollution attacks, setting properties like <code>__proto__</code> using safe mechanisms that do not trigger prototype pollution. However, while the returned objects are safe on their own, they may become problematic if used carelessly.</p> <p>Inspired by <code>secure-json-parse</code>, the library now offers a way to either drop unsafe properties from the returned object, or to throw an error and reject documents altogether. By default, these potentially unsafe keys are preserved and returned.</p> <h3>Miscellaneous updates</h3> <ul> <li>Unicode BOM is now gracefully accepted and ignored.</li> <li>Table array headers are now properly checked again. Reported in <a href="https://redirect.github.com/squirrelchat/smol-toml/issues/65">#65</a>.</li> <li>Closed certain gaps where invalid whitespace would be accepted. Reported in <a href="https://redirect.github.com/squirrelchat/smol-toml/issues/61">#61</a>.</li> <li>Bogus local date and local time values with a UTC offset are no longer accepted.</li> <li>Certain error messages are more accurate and handle errors at line boundaries better.</li> <li>The default export of the lib is now formally deprecated; use a <code>import *</code> instead. Proposed in <a href="https://redirect.github.com/squirrelchat/smol-toml/issues/50">#50</a>.</li> <li>On Node 20+, strings that contain lone surrogates are now normalised to well-formed strings.</li> <li>On Node 20+, keys that contain lone surrogates are now rejected.</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/squirrelchat/smol-toml/compare/v1.8.0...v1.9.0">https://github.com/squirrelchat/smol-toml/compare/v1.8.0...v1.9.0</a></p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/squirrelchat/smol-toml/commit/6f9739a5ab481f57c3112024bc4947534b580b58"><code>6f9739a</code></a> fix: gate <code>[is|to]WellFormed</code> (Node 18 compat)</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/a73ca32c7c9237f744c880d900ad15307a0cef56"><code>a73ca32</code></a> fix: no Temporal with toml-test when Node < 26</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/7727890604580bd3fc2d7d2f79ad6e67b745ebe7"><code>7727890</code></a> chore: version bump</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/641903d60d47900080602b6a83e919d2a526547f"><code>641903d</code></a> chore: rewrite README.md</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/2df14c57945fec5a3737bc0cdce06a436bf9a77e"><code>2df14c5</code></a> fix(types): make it work if Temporal doesn't exist</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/3eaa44ef54b859990969935664b12023b26d0eae"><code>3eaa44e</code></a> chore: update benchmark harness</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/cd3ba6021a59bff0ac57dc059ca2e194365caedd"><code>cd3ba60</code></a> feat: safety option for dangerous properties</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/6746a7f3ec066109ef8ba69126489fd84b6d3b73"><code>6746a7f</code></a> perf: refactor TomlDate to avoid regex path</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/16fa64fc5efad895e8657d70e5a1855a16f58ace"><code>16fa64f</code></a> chore: move benchmarks and test harness under 0BSD</li> <li><a href="https://github.com/squirrelchat/smol-toml/commit/bbd14b154b603068ad25ad54b4a3e7f53adeedc0"><code>bbd14b1</code></a> fix: correct sign for single-char numbers</li> <li>Additional commits viewable in <a href="https://github.com/squirrelchat/smol-toml/compare/v1.8.0...v1.9.0">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/max-sixty/worktrunk/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
40abc9d741 |
chore: bump source-map-js from 1.2.1 to 1.2.2 in /docs (#4378)
Bumps [source-map-js](https://github.com/7rulnik/source-map-js) from 1.2.1 to 1.2.2. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/7rulnik/source-map-js/releases">source-map-js's releases</a>.</em></p> <blockquote> <h2>v1.2.2</h2> <ul> <li> <p>Fix crash when executing in browser with CSP script-src that don't permit unsafe-eval (<a href="https://redirect.github.com/7rulnik/source-map-js/pull/29">#29</a>) <a href="https://github.com/xfournet"><code>@xfournet</code></a></p> </li> <li> <p>Fix denial of service from malicious indexed source maps (CVE-2026-93749) (<a href="https://redirect.github.com/7rulnik/source-map-js/pull/79">#79</a>)</p> <p>Reported by <a href="https://github.com/waydeshi"><code>@waydeshi</code></a> in <a href="https://redirect.github.com/7rulnik/source-map-js/issues/76">#76</a>. A fix was also proposed by <a href="https://github.com/aniebiet"><code>@aniebiet</code></a> in <a href="https://redirect.github.com/7rulnik/source-map-js/pull/78">#78</a>.</p> </li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/7rulnik/source-map-js/blob/main/CHANGELOG.md">source-map-js's changelog</a>.</em></p> <blockquote> <h2>1.2.2</h2> <ul> <li> <p>Fix crash when executing in browser with CSP script-src that don't permit unsafe-eval (<a href="https://redirect.github.com/7rulnik/source-map-js/pull/29">#29</a>) <a href="https://github.com/xfournet"><code>@xfournet</code></a></p> </li> <li> <p>Fix denial of service from malicious indexed source maps (CVE-2026-93749) (<a href="https://redirect.github.com/7rulnik/source-map-js/pull/79">#79</a>)</p> <p>Reported by <a href="https://github.com/waydeshi"><code>@waydeshi</code></a> in <a href="https://redirect.github.com/7rulnik/source-map-js/issues/76">#76</a>. A fix was also proposed by <a href="https://github.com/aniebiet"><code>@aniebiet</code></a> in <a href="https://redirect.github.com/7rulnik/source-map-js/pull/78">#78</a>.</p> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/7rulnik/source-map-js/commit/0a1d334fd1e55a47df97fcd60a7915d46df3b08a"><code>0a1d334</code></a> 1.2.2</li> <li><a href="https://github.com/7rulnik/source-map-js/commit/4c6fa26d77419bd8e48ec92844866cce7d9ae739"><code>4c6fa26</code></a> Update changelog</li> <li><a href="https://github.com/7rulnik/source-map-js/commit/cf7658058ceeaa8619d5ae0ec90be6905209d016"><code>cf76580</code></a> Fix denial of service from malicious indexed source maps (CVE-2026-93749) (<a href="https://redirect.github.com/7rulnik/source-map-js/issues/79">#79</a>)</li> <li><a href="https://github.com/7rulnik/source-map-js/commit/7899a86615c630f4fc220273ff9fe2e8e49a56df"><code>7899a86</code></a> Fix crash when executing browser with CSP script-src that don't permit unsafe...</li> <li>See full diff in <a href="https://github.com/7rulnik/source-map-js/compare/v1.2.1...v1.2.2">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/max-sixty/worktrunk/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
c2f58e27a7 |
chore: bump @astrojs/starlight from 0.42.4 to 0.42.5 in /docs in the docs-site group (#4373)
Bumps the docs-site group in /docs with 1 update: [@astrojs/starlight](https://github.com/withastro/starlight/tree/HEAD/packages/starlight). Updates `@astrojs/starlight` from 0.42.4 to 0.42.5 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/withastro/starlight/releases">@astrojs/starlight's releases</a>.</em></p> <blockquote> <h2><code>@astrojs/starlight</code><a href="https://github.com/0"><code>@0</code></a>.42.5</h2> <h3>Patch Changes</h3> <ul> <li><a href="https://redirect.github.com/withastro/starlight/pull/4227">#4227</a> <a href="https://github.com/withastro/starlight/commit/5ba7a70ad491ed8b5fc7033558dcc5428112cf97"><code>5ba7a70</code></a> Thanks <a href="https://github.com/I90rche"><code>@I90rche</code></a>! - Adds Macedonian language support</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/withastro/starlight/blob/main/packages/starlight/CHANGELOG.md">@astrojs/starlight's changelog</a>.</em></p> <blockquote> <h2>0.42.5</h2> <h3>Patch Changes</h3> <ul> <li><a href="https://redirect.github.com/withastro/starlight/pull/4227">#4227</a> <a href="https://github.com/withastro/starlight/commit/5ba7a70ad491ed8b5fc7033558dcc5428112cf97"><code>5ba7a70</code></a> Thanks <a href="https://github.com/I90rche"><code>@I90rche</code></a>! - Adds Macedonian language support</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/withastro/starlight/commit/b8b654ccf618d876552f8d72d3fbe75f996aaf43"><code>b8b654c</code></a> [ci] release (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4233">#4233</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/5ba7a70ad491ed8b5fc7033558dcc5428112cf97"><code>5ba7a70</code></a> i18n(mk): Add Macedonian UI translations (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4227">#4227</a>)</li> <li>See full diff in <a href="https://github.com/withastro/starlight/commits/@astrojs/starlight@0.42.5/packages/starlight">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
54fa4a0b9a |
docs(config): correct stale examples and lists in wt config help (#4363)
Fixes four pieces of `wt config` help text that no longer match behavior. The most user-visible is the `wt config state vars clear` example labelled "Clear all keys for a specific branch", which ran `clear env --branch=feature` and so cleared only the `env` key; it now shows `--all --branch=feature`. The other three are lists that missed newer behavior: - **`wt config plugins`** described the Codex plugin as "Worktrunk configuration skill" only. It also installs activity-marker hooks ([`.codex-plugin/plugin.json`](https://github.com/max-sixty/worktrunk/blob/main/plugins/worktrunk/.codex-plugin/plugin.json)), as the `wt config plugins codex` help already says. - **`wt config state marker`** said only the Claude Code plugin sets markers automatically. The Codex, OpenCode, Pi and oh-my-pi plugins do too. - **`wt config state logs`** listed the background post-hooks as post-start, post-switch, post-commit and post-merge. post-remove also runs in the background through `register_planned` in `src/output/handlers.rs` and logs under the removed branch's subtree. The generated docs mirrors and the three affected help snapshots are regenerated (`test_docs_are_in_sync`, `help` tests pass locally). I ran the new example against a branch with no vars, and it parses and runs. This is a docs-only change, so there's no regression test. Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
64ead5388a |
docs(list): drop the stale-branch and dirty-tree skips from JSON help (#4359)
`wt list --help` (and the generated `list.md` pages, skill mirrors, and `list-v2.json` schema) explains `·`, JSON `null`, and `default_branch.integration` in ways the collector no longer matches. This corrects three claims. No behavior changes. - **"branch too stale" for `·` and `null`.** #2098 removed the stale-branch skip (`stale_branches`), and nothing in `src/commands/list/collect/` skips tasks by branch age now. The remaining sources of `null` are a timeout, a skipped probe (column plan or unborn branch), or a failed forge fetch. - **`integration` "null when a dirty tree skipped the checks".** Dirty trees don't skip the probes. They run on the committed HEAD either way, as `json_default_branch` says and `test_integration_positive_match_ignores_cleanliness` pins with a dirty `trees_match` result. A dirty integrated branch reports its reason, not `null`. - **"every reason renders as the same `⊂`".** `"same_commit"` renders as `_` (or `–` with uncommitted changes), per `IntegrationReason::SameCommit` and the Default-branch symbol table in the same help page. `⊂` also needs a clean tree. The same commit updates the `JsonDefaultBranch::integration` docstring, which generates the published schema description, and four internal comments in `collect/execution.rs` that still listed the stale-branch skip. No test is added because this changes only prose. Help snapshots and doc mirrors are regenerated, and `test_docs_are_in_sync` passes. --------- Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
e505d33f25 |
docs: remove incidental details from public documentation (#4355)
Remove incidental details accumulated in recent public documentation: an unnamed-machine disk-use anecdote, internal Codex and aichat explanations, and redundant repair and edge-case narratives. Keep the working setup recipes, hook contracts, and JSON field definitions. Remove the unusable shared-skill footnote while preserving the capability table, and shorten prune's age explanation while retaining the effect of Git maintenance on older branches without reflogs. Regenerate command pages, skill mirrors, the config example, and help snapshots from their authored sources. Validation: the full pre-merge gate passes (5,048 tests, lint, lockfile, doctests, and Rust documentation), along with the documentation site build. The complete diff was independently reviewed. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
27d12e0afa |
Retain valid environment overrides when another setting is invalid (#4348)
One invalid environment override currently discards the entire environment layer. Validate each independent setting against the same file configuration, retaining valid overrides and attributing warnings only to rejected settings. Custom-column fields form one setting, including project-scoped columns, so a required template and its integer width are accepted together. Deprecated names migrate before type selection. Valid environment values can repair an empty worktree path while unrelated invalid overrides are rejected. Typed validation issues identify their setting paths, and the loader preserves the current structured config diagnostics. Validation: the required pre-merge gate passed 5,058 tests with one skipped, plus lint, doctests, and documentation generation. Real CLI regressions cover merged system/user layers, mixed valid/invalid overrides, lower-layer repairs, and project-scoped compound settings. Documentation sync passes. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
f4f1bbdef7 |
fix(prune): serialize safe deletions and run hooks concurrently (#4337)
Concurrent prune deletions can exhaust Git's packed-refs lock timeout. An unchanged branch was then reported as "moved during deletion", and removal could absorb the Git failure while reporting success. This change serializes safe ref deletions within the repository, reports movement only when the surviving SHA changed, and propagates other failures after arranging cleanup and teardown hooks. A missing snapshot SHA fails closed. Each safe deletion uses one `git update-ref -d` with the original expected SHA. The repository mutex covers that mutation and its failure classification; interruptions cancel waiting deletions before they can mutate anything. Integration and checkout reads remain outside the mutex. Checkout protection remains best effort; Git's atomic expected-SHA comparison protects concurrent commits to the candidate branch. Worktree registry coordination independently keeps enumeration and teardown from overlapping. Prune runs pre-remove hooks concurrently across worktrees. Each worktree's hook pipeline finishes before fresh ownership, lock, and cleanliness checks. Hooks coordinate shared writes themselves, avoid writing into other removal candidates, and can race Git configuration readers on Windows; these limits are documented in help and its generated mirrors. The command lock only coordinates terminal output for foreground/current removals. Trash cleanup starts before waiting for ref deletion, and current-worktree placeholder cleanup removes only an empty directory. The ref deletion path has no request queue, batch transactions, or batch recovery. The coordinator drops from 256 production lines to 61. Three alternating pairs comparing the former batch path with the actual mutex implementation measured 540 → 645 ms for 80 packed orphan branches and 598 → 641 ms for 40 worktrees; all 12 samples verified complete cleanup. Machine load was high, so these fixture timings are limited evidence of the cost. The simpler implementation accepts that measured penalty. Regression coverage exercises real packed-ref contention, original-SHA protection, per-ref error isolation, interruption of waiting deletions, cleanup while deletion is blocked, pre-hook rendezvous, and post-hook overlap. Existing tests cover checkout retention and foreground/background error teardown. Validation: the full local pre-merge gate passes with 5,040 tests and one skipped, plus formatting, Clippy, documentation, and doctests. Generated docs and skill mirrors are in sync. Independent review found no remaining issues. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
53fc376ad1 |
chore: bump devalue from 5.9.1 to 5.9.4 in /docs (#4339)
Bumps [devalue](https://github.com/sveltejs/devalue) from 5.9.1 to 5.9.4. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/sveltejs/devalue/releases">devalue's releases</a>.</em></p> <blockquote> <h2>v5.9.4</h2> <h3>Patch Changes</h3> <ul> <li>067b125: perf: annotate module-level <code>Object.freeze</code> calls as pure so unused operation tables tree-shake</li> </ul> <h2>v5.9.3</h2> <h3>Patch Changes</h3> <ul> <li>6861dbb: fix: avoid scanning sparse array holes in <code>uneval</code> traversal and shared-array population</li> <li>9ec5130: fix: reject non-string null-prototype object keys in <code>parse</code> and <code>unflatten</code> to prevent bypassing the <code>__proto__</code> check</li> <li>dae8153: fix: prevent unhandled internal rejections in <code>stringifyAsync</code> when serializing multiple promises</li> <li>84f6f67: fix: prevent quadratic <code>uneval</code> output expansion for repeated strings and bigints</li> <li>6861dbb: fix: avoid eager allocation when evaluating sparse arrays emitted by <code>uneval</code></li> <li>8f8d78e: fix: validate revived backing buffers before constructing typed arrays</li> <li>46dc877: fix: serialize only the visible bytes of Node Buffers in <code>stringify</code>, <code>stringifyAsync</code> and <code>uneval</code>, preventing disclosure of unrelated data from their shared allocation pool</li> </ul> <h2>v5.9.2</h2> <h3>Patch Changes</h3> <ul> <li>8b2a456: fix: reject out-of-bounds indices</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/sveltejs/devalue/blob/main/CHANGELOG.md">devalue's changelog</a>.</em></p> <blockquote> <h2>5.9.4</h2> <h3>Patch Changes</h3> <ul> <li>067b125: perf: annotate module-level <code>Object.freeze</code> calls as pure so unused operation tables tree-shake</li> </ul> <h2>5.9.3</h2> <h3>Patch Changes</h3> <ul> <li>6861dbb: fix: avoid scanning sparse array holes in <code>uneval</code> traversal and shared-array population</li> <li>9ec5130: fix: reject non-string null-prototype object keys in <code>parse</code> and <code>unflatten</code> to prevent bypassing the <code>__proto__</code> check</li> <li>dae8153: fix: prevent unhandled internal rejections in <code>stringifyAsync</code> when serializing multiple promises</li> <li>84f6f67: fix: prevent quadratic <code>uneval</code> output expansion for repeated strings and bigints</li> <li>6861dbb: fix: avoid eager allocation when evaluating sparse arrays emitted by <code>uneval</code></li> <li>8f8d78e: fix: validate revived backing buffers before constructing typed arrays</li> <li>46dc877: fix: serialize only the visible bytes of Node Buffers in <code>stringify</code>, <code>stringifyAsync</code> and <code>uneval</code>, preventing disclosure of unrelated data from their shared allocation pool</li> </ul> <h2>5.9.2</h2> <h3>Patch Changes</h3> <ul> <li>8b2a456: fix: reject out-of-bounds indices</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/sveltejs/devalue/commit/434358aa98c27b6480bda6d1e69426e2054ed6a0"><code>434358a</code></a> Version Packages (<a href="https://redirect.github.com/sveltejs/devalue/issues/202">#202</a>)</li> <li><a href="https://github.com/sveltejs/devalue/commit/067b125f0d49c99a810eb0edfeb439ed29abe823"><code>067b125</code></a> perf: annotate module-level Object.freeze calls as pure (<a href="https://redirect.github.com/sveltejs/devalue/issues/200">#200</a>)</li> <li><a href="https://github.com/sveltejs/devalue/commit/53cd3db7dddf34bb8c2ab1ebc98dafd21daab918"><code>53cd3db</code></a> Version Packages (<a href="https://redirect.github.com/sveltejs/devalue/issues/201">#201</a>)</li> <li><a href="https://github.com/sveltejs/devalue/commit/46dc877b3570dafb1cd3291b9bb48cecef8f7266"><code>46dc877</code></a> Merge commit from fork</li> <li><a href="https://github.com/sveltejs/devalue/commit/84f6f67999104e36940f744bec0443536de1b463"><code>84f6f67</code></a> Merge commit from fork</li> <li><a href="https://github.com/sveltejs/devalue/commit/6861dbbb7e548849e48bce718e88747a298f7250"><code>6861dbb</code></a> Merge commit from fork</li> <li><a href="https://github.com/sveltejs/devalue/commit/8f8d78e173f8a00023d009c7677ccc600dee0b99"><code>8f8d78e</code></a> Merge commit from fork</li> <li><a href="https://github.com/sveltejs/devalue/commit/dae8153e9d7541b975cc4018138d6cebec6c1199"><code>dae8153</code></a> Merge commit from fork</li> <li><a href="https://github.com/sveltejs/devalue/commit/9ec513072e31f45e60d44dad6f0dba9c92bb8675"><code>9ec5130</code></a> Merge commit from fork</li> <li><a href="https://github.com/sveltejs/devalue/commit/8ade61d0e70d935a780e6cb0a69ee2a5383b4855"><code>8ade61d</code></a> chore: fix bench:compare script (<a href="https://redirect.github.com/sveltejs/devalue/issues/198">#198</a>)</li> <li>Additional commits viewable in <a href="https://github.com/sveltejs/devalue/compare/v5.9.1...v5.9.4">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/max-sixty/worktrunk/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
af7f54b514 |
style(list): use a dim outline flag for irregular worktrees (#4334)
Display off-template paths and duplicate branch checkouts with a dim outline flag (`⚐`) instead of the dim yellow filled flag (`⚑`). Use the same neutral dim style as the other informational status symbols, and update help, documentation mirrors, and snapshots. Validation: all 343 targeted list/help/promote tests pass, along with documentation sync, docs build, Clippy, and doctests. The full local gate has 5,012 passes and four failures: three background-removal timeouts (the tests pass in isolation on this branch and freshly rebuilt main) and a Git error-message snapshot mismatch reproduced on main with Git 2.56.0. > _This was written by Codex on behalf of max-sixty_ |
||
|
|
ca8d3797b2 | docs: pass --code to the aichat commit-generation example (#4332) | ||
|
|
2f85940012 |
docs(switch): say that wt list flags a --path worktree off its template path (#4328)
The new `--path` help section (from #4317) says that "only `wt step relocate`" treats a worktree created with `--path` differently. That isn't true: `wt list` marks the row `⚑` (`worktree.branch_mismatch`, "Worktree isn't at the path its branch implies"), because `is_worktree_at_expected_path` compares every branch worktree against the `worktree-path` template. #4317's own PR description says as much ("`wt list` still marks these rows `⚑`"), but the help text didn't carry it over. This rewords the sentence to name both: commands still reach the worktree by branch or path, `wt list` flags it `⚑`, and `wt step relocate` offers to move it back. The change is in `src/cli/mod.rs`, plus the regenerated docs/skill mirrors and the `help_switch_long` snapshot. Verified against a local build: after `wt switch --create feature/x --path ../custom`, `wt list` shows `+ feature/x ⚑_ … ../custom`, while a template-path sibling shows no `⚑`. This changes docs only, so there's no regression test. `test_docs_are_in_sync` and the help snapshot tests pass. Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
1a2015bfc5 |
feat(switch): add --path to create a worktree outside the worktree-path template (#4317)
Adds `--path <PATH>` to `wt switch`, so one worktree can live in a directory of the user's choosing while its branch keeps its own name. This is the opt-out from the `worktree-path` template that #1982 asked for: ```console $ wt switch --create feat/JIRA-1234/dark-mode --path ../dark-mode ✓ Created branch feat/JIRA-1234/dark-mode from main and worktree @ ~/code/dark-mode $ wt switch ../dark-mode # by path $ wt switch feat/JIRA-1234/dark-mode # or by branch ``` Semantics: - **Relative paths resolve from the current directory** (or `-C`), as `git worktree add <path>` does, through the same `resolve_input_path` that already resolves `wt switch ../repo.feature`. A leading `~` expands. - **Works without `--create`** when the branch exists but has no worktree yet. - **A branch that already has a worktree elsewhere is an error**, not silently ignored: `✗ feature-z already has a worktree @ …, not …; to switch to it, run without --path`. Naming the directory it already has just switches. - **Error hints keep `--path`.** The `--clobber` suggestion for an occupied directory now reads `wt switch --create --clobber feature-y --path=../occupied`. Without `--path` it would have backed up the template's directory instead. - Occupancy by another worktree, `--clobber`, hooks, and `{{ worktree_path }}` all go through the existing plan, which now takes the requested path in place of `compute_worktree_path`. Nothing is persisted: git already records where each worktree is, and resolution, `list`, `merge`, `remove`, and hooks read paths from `git worktree list`. The one command that notices is `wt step relocate`, which offers to move an off-template worktree back to the template path. The long help now says so. `wt list` still marks these rows `⚑` and shows the `Path` column. **Open question for review:** I resolved relative paths from the cwd (git's rule) and not from the template's parent directory, which the closed #2275 did. The cwd rule is predictable and matches every other path argument wt takes. Its cost: running `--path dark-mode` from the main worktree nests the new worktree inside the repo, so users write `../dark-mode`. Tests: new integration snapshots cover create-with-path, an existing branch with no worktree, the existing-worktree-elsewhere error, and the `--clobber` hint. Help and doc mirrors are regenerated. Locally, the switch and picker integration tests (312), clippy, and pre-commit pass. The only unit-test failures are two tests that bind Unix sockets, which the CI sandbox forbids. Closes #1982 --------- Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
e0d6ecea4f |
docs(tips): configure origin fetch refspec in the bare repository layout (#4323)
`git clone --bare` stores the `origin` URL but writes no `remote.origin.fetch` refspec, so a bare clone following the [bare repository layout](https://worktrunk.dev/tips-patterns/#bare-repository-layout) never gets `origin/*` remote-tracking branches — `git branch -r` stays empty however often you fetch, and lazygit and editor integrations see no remote branches. The recipe now sets the standard refspec, fetches, and runs `git remote set-head origin --auto` right after the clone, with one sentence explaining why the extra lines are needed. Verified locally with git 2.55: a fresh `git clone --bare` has no `remote.origin.fetch` and an empty `git branch -r`; after the three added commands, `git branch -r` lists `origin/HEAD -> origin/master` and `origin/master`. The `skills/` and `plugins/` mirrors were regenerated by `test_docs_are_in_sync`, which passes. This fixes the docs only. worktrunk could also detect a bare repo with an `origin` but no fetch refspec (it already prompts about `worktree-path` on first `wt switch` in a bare repo), but #1258 settled that worktrunk shouldn't prescribe a clone layout, so this PR leaves that out. Closes #4322 — automated triage Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
ffbfcaf7b7 |
chore: bump undici from 8.10.0 to 8.11.2 in /docs (#4316)
Bumps [undici](https://github.com/nodejs/undici) from 8.10.0 to 8.11.2. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/nodejs/undici/releases">undici's releases</a>.</em></p> <blockquote> <h2>v8.11.2</h2> <h2>What's Changed</h2> <ul> <li>fix: close rejected HTTP/2 WebSocket handshake streams by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5873">nodejs/undici#5873</a></li> <li>fix: avoid reconnecting aborted requests by <a href="https://github.com/Junaid-PK"><code>@Junaid-PK</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5846">nodejs/undici#5846</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/Junaid-PK"><code>@Junaid-PK</code></a> made their first contribution in <a href="https://redirect.github.com/nodejs/undici/pull/5846">nodejs/undici#5846</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/nodejs/undici/compare/v8.11.1...v8.11.2">https://github.com/nodejs/undici/compare/v8.11.1...v8.11.2</a></p> <h2>v8.11.1</h2> <h2>What's Changed</h2> <ul> <li>deslopify websocket test by <a href="https://github.com/KhafraDev"><code>@KhafraDev</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5851">nodejs/undici#5851</a></li> <li>Revert "fix: preserve HTTP/2 for legacy fetch consumers" by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5860">nodejs/undici#5860</a></li> <li>fix websocketstream bugs by <a href="https://github.com/KhafraDev"><code>@KhafraDev</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5863">nodejs/undici#5863</a></li> <li>fix hang on 3xx response with large body by <a href="https://github.com/KhafraDev"><code>@KhafraDev</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5850">nodejs/undici#5850</a></li> <li>docs: warn about buffering response bodies by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5872">nodejs/undici#5872</a></li> <li>test: cover native fetch gzip decoding through the legacy bridge by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5874">nodejs/undici#5874</a></li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/nodejs/undici/compare/v8.11.0...v8.11.1">https://github.com/nodejs/undici/compare/v8.11.0...v8.11.1</a></p> <h2>v8.11.0</h2> <h2>What's Changed</h2> <ul> <li>fix: complete upgrade diagnostics lifecycle by <a href="https://github.com/BridgeAR"><code>@BridgeAR</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5761">nodejs/undici#5761</a></li> <li>build(deps): bump step-security/harden-runner from 2.19.4 to 2.21.0 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/nodejs/undici/pull/5753">nodejs/undici#5753</a></li> <li>fix(decompress): join a repeated content-encoding header by <a href="https://github.com/luantaraschi"><code>@luantaraschi</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5664">nodejs/undici#5664</a></li> <li>fix(cookies): keep a cookie named <strong>proto</strong> in getCookies by <a href="https://github.com/luantaraschi"><code>@luantaraschi</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5663">nodejs/undici#5663</a></li> <li>build(deps-dev): bump jest from 30.5.0 to 30.5.1 by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/nodejs/undici/pull/5784">nodejs/undici#5784</a></li> <li>build(deps): bump got from 15.1.0 to 16.0.0 in /benchmarks by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/nodejs/undici/pull/5785">nodejs/undici#5785</a></li> <li>fix: selectively re-enable SIMD for ppc64 by <a href="https://github.com/richardlau"><code>@richardlau</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5776">nodejs/undici#5776</a></li> <li>use private fields for brand checks by <a href="https://github.com/KhafraDev"><code>@KhafraDev</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5792">nodejs/undici#5792</a></li> <li>fix(h2): do not unref a session with open streams by <a href="https://github.com/kjsik11"><code>@kjsik11</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5782">nodejs/undici#5782</a></li> <li>fix(h2): avoid pool fan-out during ALPN negotiation by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5799">nodejs/undici#5799</a></li> <li>fix issue <a href="https://redirect.github.com/nodejs/undici/issues/5715">#5715</a> by <a href="https://github.com/KhafraDev"><code>@KhafraDev</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5805">nodejs/undici#5805</a></li> <li>ci: extend macOS Node.js workflow timeout by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5775">nodejs/undici#5775</a></li> <li>fix(env-http-proxy-agent): NO_PROXY wildcard semantics by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5777">nodejs/undici#5777</a></li> <li>fix(h2): do not replay a request whose response already started after GOAWAY by <a href="https://github.com/kjsik11"><code>@kjsik11</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5788">nodejs/undici#5788</a></li> <li>test: skip HTTP/2 churn test on Node.js 25 on all platforms by <a href="https://github.com/kjsik11"><code>@kjsik11</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5790">nodejs/undici#5790</a></li> <li>fix(proxy-agent): preserve repeated iterable headers by <a href="https://github.com/GiHoon1123"><code>@GiHoon1123</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5779">nodejs/undici#5779</a></li> <li>docs(errors): document ProxyConnectionError (UND_ERR_PRX_CONN) by <a href="https://github.com/kilisamemarisaaa"><code>@kilisamemarisaaa</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5781">nodejs/undici#5781</a></li> <li>dataurl parsing improvements + update WPT by <a href="https://github.com/KhafraDev"><code>@KhafraDev</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5812">nodejs/undici#5812</a></li> <li>fix(decompress): treat inherited Object.prototype names as unsupported encodings by <a href="https://github.com/NgoQuocViet2001"><code>@NgoQuocViet2001</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5807">nodejs/undici#5807</a></li> <li>test(h2): stabilize http2-connection by <a href="https://github.com/ViniciusDev26"><code>@ViniciusDev26</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5801">nodejs/undici#5801</a></li> <li>fix: preserve HTTP/2 for non-upgrade legacy requests by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5811">nodejs/undici#5811</a></li> <li>fix: skip drain dispatch for clientTtl-evicted clients in PoolBase by <a href="https://github.com/vwong"><code>@vwong</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5677">nodejs/undici#5677</a></li> <li>chore: update tests blocking release by <a href="https://github.com/vwong"><code>@vwong</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5828">nodejs/undici#5828</a></li> <li>build(deps): bump uWebSockets.js from v20.68.0 to v20.70.0 in /benchmarks by <a href="https://github.com/dependabot"><code>@dependabot</code></a>[bot] in <a href="https://redirect.github.com/nodejs/undici/pull/5824">nodejs/undici#5824</a></li> <li>fix(deduplicate): settle requests when composed with retry by <a href="https://github.com/mcollina"><code>@mcollina</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5817">nodejs/undici#5817</a></li> <li>fix(cache): do not report aborted on successful cache hits by <a href="https://github.com/Yahiro025"><code>@Yahiro025</code></a> in <a href="https://redirect.github.com/nodejs/undici/pull/5819">nodejs/undici#5819</a></li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/nodejs/undici/commit/7e016ad7e5bd6540170069a9a28b1e633b29664f"><code>7e016ad</code></a> Bumped v8.11.2 (<a href="https://redirect.github.com/nodejs/undici/issues/5886">#5886</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/fcdd5a615ab49beda87aafe14ad30106cfe3b0d5"><code>fcdd5a6</code></a> fix: skip reconnecting for aborted requests (<a href="https://redirect.github.com/nodejs/undici/issues/5846">#5846</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/dd28c5c55f4a25f7c441fd4365b1191f96c3b8bf"><code>dd28c5c</code></a> fix: close rejected HTTP/2 WebSocket handshake streams (<a href="https://redirect.github.com/nodejs/undici/issues/5873">#5873</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/5e0a2f8e02be8f1155feab2c52f55731d3bb84a4"><code>5e0a2f8</code></a> Bumped v8.11.1 (<a href="https://redirect.github.com/nodejs/undici/issues/5871">#5871</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/2b728989ac5b9d247eca2094bb264ced76f7cef6"><code>2b72898</code></a> test: cover native fetch gzip decoding through the legacy bridge (<a href="https://redirect.github.com/nodejs/undici/issues/5874">#5874</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/636bf515c0c8497dd0ca68917e4e38577c27669e"><code>636bf51</code></a> docs: warn about buffering response bodies (<a href="https://redirect.github.com/nodejs/undici/issues/5872">#5872</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/8145595e221779980d91ff611f14e5a984661388"><code>8145595</code></a> fix hang on 3xx response with large body (<a href="https://redirect.github.com/nodejs/undici/issues/5850">#5850</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/f3cbe486706da6163b4ca226022e74df73168dd5"><code>f3cbe48</code></a> fix websocketstream bugs (<a href="https://redirect.github.com/nodejs/undici/issues/5863">#5863</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/1d4ea0a883bf33275d00c4db55377892180b2747"><code>1d4ea0a</code></a> Revert "fix: preserve HTTP/2 for legacy fetch consumers" (<a href="https://redirect.github.com/nodejs/undici/issues/5860">#5860</a>)</li> <li><a href="https://github.com/nodejs/undici/commit/77d7b3f8dd2d8114b686e32d8d28bd3dde06bc33"><code>77d7b3f</code></a> deslopify websocket test (<a href="https://redirect.github.com/nodejs/undici/issues/5851">#5851</a>)</li> <li>Additional commits viewable in <a href="https://github.com/nodejs/undici/compare/v8.10.0...v8.11.2">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/max-sixty/worktrunk/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
5177031444 |
fix(remove): name the detached worktree a branch-only removal leaves behind (#3791)
`wt remove <branch>` on a worktree whose HEAD has since been detached reported `○ No worktree found for branch <name>` and said nothing more, while a directory sat at exactly that branch's path. That line is true — detaching severs the only link git records between a worktree and its branch, so the branch really has no worktree — but it reads as "nothing is there". The removal now names what it leaves behind: ```console $ wt remove feature ○ No worktree found for branch feature; a detached worktree is @ ~/repo.feature ↳ To remove the detached worktree, run wt remove ~/repo.feature ✓ Removed branch feature (same commit as main, _) ``` `--format=json` carries the same fact as `detached_worktree` on a branch-only removal, since the human line goes to stderr and "a script checking the exit code sees a clean run" was half of what the issue reported. The directory is found by matching the `worktree-path` template, which after a detach is all that still connects the two. That is a weaker association than the rest of the module draws — the template records where a worktree *would* go, not that this one belongs to that branch — and it is why this only ever adds a line. A mention that occasionally points at a coincidence costs nothing. Three states go unmatched, each because naming them would mislead: a worktree checked out on some *other* branch (that branch names it), the main worktree (whose path-based removal `wt remove` refuses, so the hint would be a dead end), and a prunable entry (nothing on disk to point at). <details> <summary>Why this doesn't refuse the removal, and what changed from the earlier commits on this branch</summary> The first four commits made `wt remove <branch>` refuse in this situation, following the issue's "either remove the worktree, or refuse". Reviewing the premise rather than the menu, refusing was the wrong call: - **Nothing was ever lost.** `SafeDelete` — the default — retains an unintegrated branch, so the only refs the old behavior deleted were ones worktrunk's own six-condition integration test defines as lossless. Even `wt remove -D` on an unmerged branch leaves the commits reachable: a detached worktree's HEAD is a GC root, and the commit survives `gc --prune=now` with no branch pointing at it. - **So the refusal protected nothing in three of four cases** — `--no-delete-branch`, unintegrated `SafeDelete`, and integrated `SafeDelete` — and in the fourth the user had typed `-D`. - **It contradicted the addressing model.** `CLAUDE.md`: a path "names what a branch cannot (a detached worktree, one of two checkouts of a branch)". The guard let a branch reach one anyway, via a path template. - **It cost real work**: one branch with a detached directory at its path failed a whole multi-branch cleanup. `detached_worktree_for` survives to find the path; it no longer decides whether the command runs. The scoping the guard had accumulated over three review rounds — a branch-existence check, a `deletion_mode` gate — goes with it, since an extra line of output needs no narrowing. Two fixes from those rounds stand on their own and are kept: - **The double-escaped hint path.** `format_path_for_display` already returns a shell-ready token, so composing it with `suggest_command` escaped it twice: a worktree under `$HOME` rendered as `wt remove '~/repo.feature'`, where the quoting suppresses the tilde expansion, and a path needing real quoting came out carrying literal quote characters. Three call sites had it, two predating this branch. `format_path_for_display` now documents the trap, which until then lived only in `pr_mr_switch_hint`'s docstring. - **`live_sibling_checkout`'s docstring**, explaining why that predicate stays on `exists()` rather than the `worktree_is_unusable` union the rest of the removal path uses: the two disagree only on a present directory that no longer holds its worktree, and since the predicate only ever gates a deletion, it takes the conservative test. </details> ## Testing `test_remove_branch_whose_worktree_was_detached` pins the behavior — branch removed, worktree untouched, output naming it — and `test_remove_json_reports_detached_worktree` pins the machine channel. Snapshots cover the wording, the `--no-delete-branch` no-op, an unintegrated branch whose ref is retained, a prunable entry (which is named nothing, having nothing on disk), a detached main worktree (where the default-branch refusal is still the accurate answer), and the multi-target case. Fixes #3769 Thanks to @chachi for the report — the repro runs exactly as written, and the diagnosis in it (the branch→worktree lookup, not detached removal) is what this addresses. > _This was written by Claude Code on behalf of max-sixty_ --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> Co-authored-by: worktrunk-bot <254187624+worktrunk-bot@users.noreply.github.com> |
||
|
|
2661ba15bf |
feat(plugin): add wt config plugins claude hook for the Claude hooks (#4304)
Adds a hidden `wt config plugins claude hook` subcommand that reads Claude Code's hook payload from stdin and acts on its `hook_event_name`: activity markers, the `EnterWorktree` approval, and `WorktreeCreate` / `WorktreeRemove`. This is the first half of getting the Claude Code plugin into Anthropic's plugin directory, whose validator blocks our current `hooks/hooks.json` because its commands compute paths (`-C "$CLAUDE_PROJECT_DIR"`) and carry inline programs (`bash -c '…$(jq …)…'`). Once `hooks.json` runs this subcommand, every hook command is the same literal line and the plugin no longer needs `jq`. `hooks.json` itself is unchanged here. The marketplace serves the plugin from `main`, so switching it before a release ships `hook` would break worktree creation for everyone on v0.79. The switch is a separate draft PR, to merge a few weeks after the release that ships this. - `src/commands/config/plugins.rs`: `handle_claude_hook` dispatches on the event and re-runs the same `wt` binary with the command a user would type, so each action behaves exactly as the old hook command did. Its doc comment carries the per-event contracts (#2939, #3545, #3754, #3921). - `approve-enter-worktree` stays, sharing its check with `hook`, for plugin copies installed before `hook` existed: marketplace installs don't update on their own. - `tests/integration_tests/claude_hook.rs` covers the new subcommand directly; the existing shell-integration tests still run the real `hooks.json` commands. - `plugin.json` gains the listing metadata the directory reads (`license`, `homepage`, `repository`, `keywords`, `icon`, with `icon.png` copied from `docs/public/logo.png`), and the plugin README describes what each hook runs, which the directory's security scan checks for. - The direnv example in the tips docs builds its path with direnv's `expand_path` instead of `$PWD`, which the directory scanner read as a credential. > _This was written by Claude Code on behalf of max-sixty_ --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
a70ab5a678 |
chore: bump the docs-site group in /docs with 2 updates (#4309)
Bumps the docs-site group in /docs with 2 updates: [@astrojs/starlight](https://github.com/withastro/starlight/tree/HEAD/packages/starlight) and [astro](https://github.com/withastro/astro/tree/HEAD/packages/astro). Updates `@astrojs/starlight` from 0.42.1 to 0.42.4 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/withastro/starlight/releases">@astrojs/starlight's releases</a>.</em></p> <blockquote> <h2><code>@astrojs/starlight</code><a href="https://github.com/0"><code>@0</code></a>.42.4</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4149">#4149</a> <a href="https://github.com/withastro/starlight/commit/fa10e87376f49f76a693e8d2b292aef65b959e37"><code>fa10e87</code></a> Thanks <a href="https://github.com/ematipico"><code>@ematipico</code></a>! - Optimizes rendering of large nested sidebars</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4215">#4215</a> <a href="https://github.com/withastro/starlight/commit/f791de65e6e14e9011586004d79f78fcef3a427e"><code>f791de6</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Adds a new <code>seti:coffee</code> icon for CoffeeScript files in the <code><FileTree></code> component.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4215">#4215</a> <a href="https://github.com/withastro/starlight/commit/f791de65e6e14e9011586004d79f78fcef3a427e"><code>f791de6</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes <code><FileTree></code> icons for <code>.ejs</code> and <code>npm-debug.log</code> files displaying the default file icon.</p> </li> </ul> <h2><code>@astrojs/starlight</code><a href="https://github.com/0"><code>@0</code></a>.42.3</h2> <h3>Patch Changes</h3> <ul> <li><a href="https://redirect.github.com/withastro/starlight/pull/4211">#4211</a> <a href="https://github.com/withastro/starlight/commit/33e21ec86274070df1725580c1e8134e34062c15"><code>33e21ec</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes a potential page freeze due to table of contents highlighting when a <a href="https://starlight.astro.build/reference/overrides/#pagetitle"><code><PageTitle></code> component</a> override does not render a heading with the required <code>id="_top"</code>.</li> </ul> <h2><code>@astrojs/starlight</code><a href="https://github.com/0"><code>@0</code></a>.42.2</h2> <h3>Patch Changes</h3> <ul> <li><a href="https://redirect.github.com/withastro/starlight/pull/4201">#4201</a> <a href="https://github.com/withastro/starlight/commit/fafd989453b024081e51c0c92db920a369c8153e"><code>fafd989</code></a> Thanks <a href="https://github.com/linux-universe"><code>@linux-universe</code></a>! - Add 1 new icon: <code>fluxer</code></li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/withastro/starlight/blob/main/packages/starlight/CHANGELOG.md">@astrojs/starlight's changelog</a>.</em></p> <blockquote> <h2>0.42.4</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4149">#4149</a> <a href="https://github.com/withastro/starlight/commit/fa10e87376f49f76a693e8d2b292aef65b959e37"><code>fa10e87</code></a> Thanks <a href="https://github.com/ematipico"><code>@ematipico</code></a>! - Optimizes rendering of large nested sidebars</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4215">#4215</a> <a href="https://github.com/withastro/starlight/commit/f791de65e6e14e9011586004d79f78fcef3a427e"><code>f791de6</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Adds a new <code>seti:coffee</code> icon for CoffeeScript files in the <code><FileTree></code> component.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/starlight/pull/4215">#4215</a> <a href="https://github.com/withastro/starlight/commit/f791de65e6e14e9011586004d79f78fcef3a427e"><code>f791de6</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes <code><FileTree></code> icons for <code>.ejs</code> and <code>npm-debug.log</code> files displaying the default file icon.</p> </li> </ul> <h2>0.42.3</h2> <h3>Patch Changes</h3> <ul> <li><a href="https://redirect.github.com/withastro/starlight/pull/4211">#4211</a> <a href="https://github.com/withastro/starlight/commit/33e21ec86274070df1725580c1e8134e34062c15"><code>33e21ec</code></a> Thanks <a href="https://github.com/HiDeoo"><code>@HiDeoo</code></a>! - Fixes a potential page freeze due to table of contents highlighting when a <a href="https://starlight.astro.build/reference/overrides/#pagetitle"><code><PageTitle></code> component</a> override does not render a heading with the required <code>id="_top"</code>.</li> </ul> <h2>0.42.2</h2> <h3>Patch Changes</h3> <ul> <li><a href="https://redirect.github.com/withastro/starlight/pull/4201">#4201</a> <a href="https://github.com/withastro/starlight/commit/fafd989453b024081e51c0c92db920a369c8153e"><code>fafd989</code></a> Thanks <a href="https://github.com/linux-universe"><code>@linux-universe</code></a>! - Add 1 new icon: <code>fluxer</code></li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/withastro/starlight/commit/3ec633b8c50d3e1a6d67cae7dc4c50f80101ea41"><code>3ec633b</code></a> [ci] release (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4217">#4217</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/f791de65e6e14e9011586004d79f78fcef3a427e"><code>f791de6</code></a> Fix file icons generator (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4215">#4215</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/fa10e87376f49f76a693e8d2b292aef65b959e37"><code>fa10e87</code></a> perf: avoid repeated sidebar subtree scans (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4149">#4149</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/fafea30324b17b52c489bc37dffbc78c8cd28e2f"><code>fafea30</code></a> Add benchmark for sidebar sublist processing (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4216">#4216</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/b0d3b8e721b8612ab498aea678e760c099bda5a3"><code>b0d3b8e</code></a> [ci] release (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4212">#4212</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/33e21ec86274070df1725580c1e8134e34062c15"><code>33e21ec</code></a> Fix toc highlighting potential page freeze (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4211">#4211</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/525590a2480378187ea7b69c3863563d04e56315"><code>525590a</code></a> [ci] release (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4206">#4206</a>)</li> <li><a href="https://github.com/withastro/starlight/commit/fafd989453b024081e51c0c92db920a369c8153e"><code>fafd989</code></a> add Fluxer icon (<a href="https://github.com/withastro/starlight/tree/HEAD/packages/starlight/issues/4201">#4201</a>)</li> <li>See full diff in <a href="https://github.com/withastro/starlight/commits/@astrojs/starlight@0.42.4/packages/starlight">compare view</a></li> </ul> </details> <br /> Updates `astro` from 7.3.3 to 7.3.5 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/withastro/astro/releases">astro's releases</a>.</em></p> <blockquote> <h2>astro@7.3.5</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/17736">#17736</a> <a href="https://github.com/withastro/astro/commit/2b8b2e80169da0ab19055166438291c46fcfe320"><code>2b8b2e8</code></a> Thanks <a href="https://github.com/ematipico"><code>@ematipico</code></a>! - Adds a new container function called <code>renderComponent()</code>, which renders Astro components with inlined styles and scripts.</p> <p>Users must import the component with the new <code>?container</code> query string:</p> <pre lang="js"><code>import { experimental_AstroContainer } from "astro/container"; import TodoList from "../components/TodoList.astro?container"; <p>const container = await experimental_AstroContainer.create();</p> <p>const _string = container.renderComponent(TodoList); </code></pre></p> </li> </ul> <h2>astro@7.3.4</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18063">#18063</a> <a href="https://github.com/withastro/astro/commit/40896acb744988d9d3c2015e810c57de26390b3f"><code>40896ac</code></a> Thanks <a href="https://github.com/adamchal"><code>@adamchal</code></a>! - Fixes incremental builds repeatedly rendering unchanged pages when modules or compiled CSS reference bundled assets.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18053">#18053</a> <a href="https://github.com/withastro/astro/commit/cf5d72f286c3c1185b7d39692b8ca8e789c16e02"><code>cf5d72f</code></a> Thanks <a href="https://github.com/Princesseuh"><code>@Princesseuh</code></a>! - Improves the <code>astro check</code> error shown for TypeScript 7. The command now explains that TypeScript 7 is not currently supported and provides instructions for experimentally type-checking Astro files with TypeScript 7.1 and <code>@astrojs/ts-content-mapper</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18086">#18086</a> <a href="https://github.com/withastro/astro/commit/795a7e44640e7ad513a590a362dc0d3259de7771"><code>795a7e4</code></a> Thanks <a href="https://github.com/ump45nose"><code>@ump45nose</code></a>! - Fix double-escaped ampersands in Markdown image <code>alt</code> and <code>title</code> attributes. The <code>__ASTRO_IMAGE_</code> round-trip now decodes the numeric (<code>&#x26;</code>) and named (<code>&amp;</code>) character references the Markdown processors emit, so an <code>&</code> in an alt or title is escaped exactly once in the final HTML instead of twice.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18074">#18074</a> <a href="https://github.com/withastro/astro/commit/042980585a75a12f3b0d63377483af98ef80e0f9"><code>0429805</code></a> Thanks <a href="https://github.com/SurefireStudios"><code>@SurefireStudios</code></a>! - Fix three error names that did not match their documented reference. <code>MissingLocale</code>, <code>MissingIndexForInternationalization</code> and <code>NoManifestAvailable</code> reported names ending in <code>Error</code> in the dev overlay, while their error reference pages are published under the unsuffixed names, so the name shown to users could not be found in the docs.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18007">#18007</a> <a href="https://github.com/withastro/astro/commit/22458379f5f258ac1df225f5af644b98b1b8237b"><code>2245837</code></a> Thanks <a href="https://github.com/L4XB"><code>@L4XB</code></a>! - Fixes the dev server re-evaluating the whole server module graph on every request. The <code>astro:head-metadata</code> plugin invalidated its component metadata virtual module from its own <code>transform</code> hook, so each evaluation of that module scheduled the next one. Adapters that run requests outside Vite's module runner, such as <code>@astrojs/cloudflare</code>, paid for a full re-evaluation of the server graph on every request for the lifetime of the process.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18096">#18096</a> <a href="https://github.com/withastro/astro/commit/43657c4612f04cecf6e34d288eed1811c6508b74"><code>43657c4</code></a> Thanks <a href="https://github.com/matthewp"><code>@matthewp</code></a>! - Fixes domain-based i18n routing to respect <code>security.allowedDomains</code> when selecting a locale from request host headers</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18043">#18043</a> <a href="https://github.com/withastro/astro/commit/8a53a8b70f964e7bc127d6991cc9aca21e87750f"><code>8a53a8b</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>image.responsiveStyles</code> emitting invalid <code>object-position</code> CSS values for same-axis keyword pairs (<code>top bottom</code>, <code>left right</code>, etc.)</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18029">#18029</a> <a href="https://github.com/withastro/astro/commit/c08252d6803d4af2890b4bd1c69e4b4fc49e2d04"><code>c08252d</code></a> Thanks <a href="https://github.com/matthewp"><code>@matthewp</code></a>! - Runs <code>astro dev</code> and <code>astro preview</code> in the foreground when an AI agent is detected on Windows, allowing the agent to manage the process lifetime. Pass <code>--background</code> explicitly to request an Astro-managed background process. Agent-inferred backgrounding remains enabled on other platforms.</p> </li> <li> <p>Updated dependencies [<a href="https://github.com/withastro/astro/commit/3fd16eeb5cd096a6ceb8cc3e70b89ed30d6fcd4d"><code>3fd16ee</code></a>, <a href="https://github.com/withastro/astro/commit/8358d59cba754480c7d830c473837a0d7100ac7e"><code>8358d59</code></a>]:</p> <ul> <li><code>@astrojs/markdown-satteri</code><a href="https://github.com/0"><code>@0</code></a>.4.2</li> </ul> </li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/withastro/astro/blob/main/packages/astro/CHANGELOG.md">astro's changelog</a>.</em></p> <blockquote> <h2>7.3.5</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/17736">#17736</a> <a href="https://github.com/withastro/astro/commit/2b8b2e80169da0ab19055166438291c46fcfe320"><code>2b8b2e8</code></a> Thanks <a href="https://github.com/ematipico"><code>@ematipico</code></a>! - Adds a new container function called <code>renderComponent()</code>, which renders Astro components with inlined styles and scripts.</p> <p>Users must import the component with the new <code>?container</code> query string:</p> <pre lang="js"><code>import { experimental_AstroContainer } from "astro/container"; import TodoList from "../components/TodoList.astro?container"; <p>const container = await experimental_AstroContainer.create();</p> <p>const _string = container.renderComponent(TodoList); </code></pre></p> </li> </ul> <h2>7.3.4</h2> <h3>Patch Changes</h3> <ul> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18063">#18063</a> <a href="https://github.com/withastro/astro/commit/40896acb744988d9d3c2015e810c57de26390b3f"><code>40896ac</code></a> Thanks <a href="https://github.com/adamchal"><code>@adamchal</code></a>! - Fixes incremental builds repeatedly rendering unchanged pages when modules or compiled CSS reference bundled assets.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18053">#18053</a> <a href="https://github.com/withastro/astro/commit/cf5d72f286c3c1185b7d39692b8ca8e789c16e02"><code>cf5d72f</code></a> Thanks <a href="https://github.com/Princesseuh"><code>@Princesseuh</code></a>! - Improves the <code>astro check</code> error shown for TypeScript 7. The command now explains that TypeScript 7 is not currently supported and provides instructions for experimentally type-checking Astro files with TypeScript 7.1 and <code>@astrojs/ts-content-mapper</code>.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18086">#18086</a> <a href="https://github.com/withastro/astro/commit/795a7e44640e7ad513a590a362dc0d3259de7771"><code>795a7e4</code></a> Thanks <a href="https://github.com/ump45nose"><code>@ump45nose</code></a>! - Fix double-escaped ampersands in Markdown image <code>alt</code> and <code>title</code> attributes. The <code>__ASTRO_IMAGE_</code> round-trip now decodes the numeric (<code>&#x26;</code>) and named (<code>&amp;</code>) character references the Markdown processors emit, so an <code>&</code> in an alt or title is escaped exactly once in the final HTML instead of twice.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18074">#18074</a> <a href="https://github.com/withastro/astro/commit/042980585a75a12f3b0d63377483af98ef80e0f9"><code>0429805</code></a> Thanks <a href="https://github.com/SurefireStudios"><code>@SurefireStudios</code></a>! - Fix three error names that did not match their documented reference. <code>MissingLocale</code>, <code>MissingIndexForInternationalization</code> and <code>NoManifestAvailable</code> reported names ending in <code>Error</code> in the dev overlay, while their error reference pages are published under the unsuffixed names, so the name shown to users could not be found in the docs.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18007">#18007</a> <a href="https://github.com/withastro/astro/commit/22458379f5f258ac1df225f5af644b98b1b8237b"><code>2245837</code></a> Thanks <a href="https://github.com/L4XB"><code>@L4XB</code></a>! - Fixes the dev server re-evaluating the whole server module graph on every request. The <code>astro:head-metadata</code> plugin invalidated its component metadata virtual module from its own <code>transform</code> hook, so each evaluation of that module scheduled the next one. Adapters that run requests outside Vite's module runner, such as <code>@astrojs/cloudflare</code>, paid for a full re-evaluation of the server graph on every request for the lifetime of the process.</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18096">#18096</a> <a href="https://github.com/withastro/astro/commit/43657c4612f04cecf6e34d288eed1811c6508b74"><code>43657c4</code></a> Thanks <a href="https://github.com/matthewp"><code>@matthewp</code></a>! - Fixes domain-based i18n routing to respect <code>security.allowedDomains</code> when selecting a locale from request host headers</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18043">#18043</a> <a href="https://github.com/withastro/astro/commit/8a53a8b70f964e7bc127d6991cc9aca21e87750f"><code>8a53a8b</code></a> Thanks <a href="https://github.com/apps/astro-factory"><code>@astro-factory</code></a>! - Fixes <code>image.responsiveStyles</code> emitting invalid <code>object-position</code> CSS values for same-axis keyword pairs (<code>top bottom</code>, <code>left right</code>, etc.)</p> </li> <li> <p><a href="https://redirect.github.com/withastro/astro/pull/18029">#18029</a> <a href="https://github.com/withastro/astro/commit/c08252d6803d4af2890b4bd1c69e4b4fc49e2d04"><code>c08252d</code></a> Thanks <a href="https://github.com/matthewp"><code>@matthewp</code></a>! - Runs <code>astro dev</code> and <code>astro preview</code> in the foreground when an AI agent is detected on Windows, allowing the agent to manage the process lifetime. Pass <code>--background</code> explicitly to request an Astro-managed background process. Agent-inferred backgrounding remains enabled on other platforms.</p> </li> <li> <p>Updated dependencies [<a href="https://github.com/withastro/astro/commit/3fd16eeb5cd096a6ceb8cc3e70b89ed30d6fcd4d"><code>3fd16ee</code></a>, <a href="https://github.com/withastro/astro/commit/8358d59cba754480c7d830c473837a0d7100ac7e"><code>8358d59</code></a>]:</p> <ul> <li><code>@astrojs/markdown-satteri</code><a href="https://github.com/0"><code>@0</code></a>.4.2</li> </ul> </li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/withastro/astro/commit/c2e01642af5f3919e4951b277a01d2de0ba1322f"><code>c2e0164</code></a> [ci] release (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18113">#18113</a>)</li> <li><a href="https://github.com/withastro/astro/commit/2b8b2e80169da0ab19055166438291c46fcfe320"><code>2b8b2e8</code></a> feat: add render component (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/17736">#17736</a>)</li> <li><a href="https://github.com/withastro/astro/commit/790c6f720efd9de362e7a2b6319ac2d721062bda"><code>790c6f7</code></a> [ci] release (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18035">#18035</a>)</li> <li><a href="https://github.com/withastro/astro/commit/9d17bf1af7eb5d6c753e590dcb36b882647f859a"><code>9d17bf1</code></a> Update dependency obug to v3 (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18100">#18100</a>)</li> <li><a href="https://github.com/withastro/astro/commit/43657c4612f04cecf6e34d288eed1811c6508b74"><code>43657c4</code></a> Fix i18n domain host validation (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18096">#18096</a>)</li> <li><a href="https://github.com/withastro/astro/commit/00393ff0819d615acea30341f2c850dbafacb826"><code>00393ff</code></a> Update dependency vitest [SECURITY] (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18026">#18026</a>)</li> <li><a href="https://github.com/withastro/astro/commit/40896acb744988d9d3c2015e810c57de26390b3f"><code>40896ac</code></a> fix(incremental): resolve asset placeholders in modules or compiled CSS (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18063">#18063</a>)</li> <li><a href="https://github.com/withastro/astro/commit/042980585a75a12f3b0d63377483af98ef80e0f9"><code>0429805</code></a> fix(errors): align three error names with their documented reference (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18074">#18074</a>)</li> <li><a href="https://github.com/withastro/astro/commit/3eab954d213e3dd040db7925b56e7ab5a02f4532"><code>3eab954</code></a> [ci] format</li> <li><a href="https://github.com/withastro/astro/commit/795a7e44640e7ad513a590a362dc0d3259de7771"><code>795a7e4</code></a> Fix double-escaped ampersands in Markdown image alt and title attributes (<a href="https://github.com/withastro/astro/tree/HEAD/packages/astro/issues/18">#18</a>...</li> <li>Additional commits viewable in <a href="https://github.com/withastro/astro/commits/astro@7.3.5/packages/astro">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> |
||
|
|
7294e7964b |
perf(list): skip the PR/MR lookup for branches never pushed (#4289)
A forge opens a PR/MR only from a branch it hosts, so a local branch that no remote has under its name can't head one. `wt list --full`, the statusline and the picker still asked the forge about every such branch whenever the CI cache (30–60s) had expired. On a repo with 239 local branches, of which 19 exist on `origin`, that was 249 `gh` calls at ~450ms and ~65ms of CPU each, about 15 CPU-seconds per run. `detect_ci` now skips the PR/MR lookup for a local branch that was never pushed: no remote has a branch by that name, and the branch's push remote (or the primary remote, when none is set) has a fetch refspec that would have recorded it under `refs/remotes/`. `git push` updates the remote-tracking ref only where the fetch refspecs map the branch. So a `--single-branch` or `--depth` clone, which maps only the cloned branch, still asks the forge about every other branch. A URL push remote (`gh pr checkout` of a fork's PR) has no refspecs and is still asked about too. Both checks read the ref inventory and config map already cached for the command. The branch-workflow fallback is unchanged, and the rule applies to every forge. The push remote now comes from the existing local-branch scan (`%(push:remotename)`, no measurable cost) instead of one `for-each-ref` per branch. `Branch::push_remote_url` forks nothing after the first scan, and the per-branch cache that existed only to avoid that fork is deleted. Measured with `wt list --full` on that repo, CI cache cleared, 5 runs each at load average ~30: | | main | this branch | |---|---:|---:| | `gh` calls | 249 | 25 | | last CI result (median) | 9.25s | 5.2s | | total wall (median) | 12.0s | 9.6s | Under that load the local git work was the bottleneck, and the 25 calls started only at 2.3–5s. On a quiet machine the CI tail should be close to one round trip; that's an estimate, not a measurement. The trade-off: a PR opened from a branch pushed by another clone, and not yet fetched here, shows no PR until the next fetch. The help text's blank-CI row now reads "Branch never pushed", replacing "No upstream", which was never exactly when the cell goes blank. `test_pr_lookup_skips_branches_on_no_remote` checks the `gh` call log for four cases: pushed, URL push remote, a push remote set up like a `--single-branch` clone, and never pushed. Dropping either the remote check or the refspec check fails it. `refspecs_track_ref_follows_the_fetch_mapping` covers the refspec matching, including negative refspecs. > _This was written by Claude Code on behalf of max-sixty_ 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
ebb27e3bfe |
docs: remove redundant CLAUDE.md imports (#4287)
Claude Code reads the existing AGENTS.md files directly, so remove the nine one-line CLAUDE.md imports that duplicate them. > _This was written by Codex on behalf of max-sixty_ |