OpenShell/crates/openshell-driver-podman/NETWORKING.md

Rootless Podman Networking

Deep-dive into how networking works in the Podman compute driver when running rootless with pasta as the network backend. Covers the external tooling (Podman, Netavark, pasta, aardvark-dns), the three nested namespace layers, and the complete data paths for SSH, outbound traffic, and supervisor-to-gateway communication.

For the general Podman driver architecture, lifecycle, API surface, and driver comparison, see README.md.

Component Stack

Podman's networking is composed of four independent projects:

Component	Language	Role
Podman	Go	Container runtime; orchestrates network lifecycle.
Netavark	Rust	Network backend; creates interfaces, bridges, firewall rules.
aardvark-dns	Rust	Authoritative DNS server for container name resolution.
pasta, part of passt	C	User-mode networking; L2-to-L4 socket translation for rootless containers.

The key split: rootful containers default to Netavark bridge networking with real kernel interfaces, while rootless containers commonly use pasta user-mode networking without needing host privileges.

How Netavark Works

Netavark is invoked by Podman as an external binary. It reads a JSON network configuration from STDIN and executes one of three commands:

• netavark setup <netns-path> creates interfaces, assigns IPs, and sets up firewall rules for NAT and port-forwarding.
• netavark teardown <netns-path> reverses setup and removes interfaces and firewall rules.
• netavark create takes a partial network config and completes it by assigning subnets and gateways.

For rootful bridge networking:

1. Podman creates a network namespace for the container.
2. Podman invokes netavark setup with the network config JSON.
3. Netavark creates a bridge, such as podman0, if it does not exist. The default subnet is 10.88.0.0/16.
4. Netavark creates a veth pair. One end goes into the container's netns and the other attaches to the bridge.
5. Netavark assigns an IP from the subnet to the container's veth interface.
6. Netavark configures iptables or nftables rules for masquerade and port mappings.
7. Netavark starts aardvark-dns when DNS is enabled, listening on the bridge gateway address.

Host Kernel
  |
  +-- Bridge interface, such as "podman0"
  |     |
  |     +-- veth pair endpoint, host side, container 1
  |     +-- veth pair endpoint, host side, container 2
  |
  +-- Host physical interface, such as eth0
        |
        +-- NAT, iptables or nftables rules managed by Netavark

Netavark also supports macvlan networks, where the container gets a sub-interface of a physical host NIC with its own MAC address, and external plugins via a documented JSON API.

How Pasta Works

Unprivileged users cannot create network interfaces on the host. They cannot create veth pairs, bridges, or iptables rules. Netavark's bridge approach cannot work directly for rootless containers without an additional rootless networking layer.

Pasta, part of the passt project, operates in userspace and translates between the container's L2 TAP interface and the host's L4 sockets. It requires no capabilities or privileges.

Container Network Namespace
  |
  +-- TAP device, such as "eth0"
  |     ^
  |     | L2 frames, Ethernet
  |     v
  +-- pasta process, userspace
        |
        | Translation: L2 frames <-> L4 sockets
        |
        v
  Host Network Stack, native TCP/UDP/ICMP sockets

For an outbound TCP connection from a container:

1. The application calls connect() to an external address.
2. The kernel routes the packet through the default gateway to the TAP device.
3. Pasta reads the raw Ethernet frame from the TAP file descriptor.
4. Pasta parses L2/L3/L4 headers and identifies the TCP SYN.
5. Pasta opens a native TCP socket on the host and calls connect() to the same destination.
6. When the host socket connects, pasta reflects the SYN-ACK back through the TAP as an L2 frame.
7. For ongoing data transfer, pasta translates between TAP frames and the host socket, coordinating TCP windows and acknowledgments between the two sides.

Pasta does not maintain per-connection packet buffers. It reflects observed sending windows and ACKs directly between peers. This is a thinner translation layer than a full TCP/IP stack.

Built-in Services

Pasta includes minimal network services so the container stack can auto-configure:

Service	Purpose
ARP proxy	Resolves the gateway address to the host's MAC address.
DHCP server	Hands out a single IPv4 address, usually matching the host's upstream interface.
NDP proxy	Handles IPv6 neighbor discovery and SLAAC prefix advertisement.
DHCPv6 server	Hands out a single IPv6 address, usually matching the host's upstream interface.

By default there is no NAT. Pasta copies the host's IP addresses into the container namespace.

Local Connection Bypass

For connections between the container and the host, pasta implements a local bypass path:

• Packets with a local destination skip L2 translation.
• TCP uses splice(2).
• UDP uses recvmmsg(2) and sendmmsg(2).

Port Forwarding

By default, pasta uses auto-detection. It scans /proc/net/tcp and /proc/net/tcp6 periodically and automatically forwards ports that are bound and listening. Port forwarding is configurable through pasta options.

Security Properties

Pasta is designed for rootless use:

• No dynamic memory allocation after startup.
• All capabilities dropped, except CAP_NET_BIND_SERVICE when granted.
• Restrictive seccomp profile.
• Detaches into its own user, mount, IPC, UTS, and PID namespaces.
• No external dependencies beyond libc.

Inter-Container Limitation

Unlike bridge networking, pasta containers are isolated from each other by default. No virtual bridge connects them. Communication requires port mappings through the host, pods with a shared network namespace, or opting into rootless Netavark bridge networking with podman network create.

Three Nested Namespaces

The Podman compute driver creates three layers of network isolation:

Namespace 1: Host
  |
  pasta manages port forwarding, such as 127.0.0.1:<ephemeral>
  gateway listens on its configured bind address and port
  |
Namespace 2: Rootless Podman network namespace, managed by pasta
  |
  Bridge "openshell", often 10.89.x.0/24
  aardvark-dns for container name resolution
  |
  Container netns
    supervisor, proxy, and relay client run here
    |
Namespace 3: Inner sandbox netns, created by supervisor
  |
  veth pair, such as 10.200.0.1 <-> 10.200.0.2
  nftables forces ordinary traffic through proxy
  user workload runs here

Pasta bridges namespace 1 and 2. The veth pair bridges namespace 2 and 3. The proxy at the boundary of namespace 2 and 3 enforces network policy.

Layer 1 Pasta

At driver startup, the driver ensures a Podman bridge network exists:

client.ensure_network(&config.network_name).await?;

This creates a bridge network named openshell by default, with DNS enabled. In rootless mode, this bridge can exist inside a user namespace managed by pasta. The bridge IP range is not reliably routable from the host.

Host
  |
  127.0.0.1:<ephemeral>, pasta binds this on the host
  |
  pasta process, translates L4 sockets <-> L2 TAP frames
  |
  rootless network namespace
  |
  Bridge "openshell", such as 10.89.1.0/24
    |
    +-- 10.89.1.1, bridge gateway and aardvark-dns
    |
    +-- veth to container netns
         |
         10.89.1.2, container IP

Layer 2 Container Networking

The container spec configures:

• nsmode: "bridge" to use the Podman bridge network.
• networks to attach to the configured bridge, openshell by default.
• portmappings with host_port: 0, container_port: 2222, and protocol: "tcp" to publish the SSH compatibility port on an ephemeral host port.
• hostadd entries for host.containers.internal and host.openshell.internal, using Podman's host-gateway resolver or the configured host_gateway_ip.

Pasta is not explicitly configured by the driver. The driver requests bridge mode and logs the network backend that Podman reports at startup.

The host.containers.internal hostname is injected into /etc/hosts so the supervisor can reach the gateway on the host. Linux defaults to host-gateway; macOS Podman machine defaults to 192.168.127.254, gvproxy's host-loopback IP, because older Podman machine images can fail to resolve host-gateway. Override this with host_gateway_ip or OPENSHELL_PODMAN_HOST_GATEWAY_IP when a Podman machine uses a non-standard host-loopback address.

If OPENSHELL_GRPC_ENDPOINT is empty, the driver auto-detects:

if config.grpc_endpoint.is_empty() {
    let scheme = if config.tls_enabled() {
        "https"
    } else {
        "http"
    };
    config.grpc_endpoint =
        format!("{scheme}://host.containers.internal:{}", config.gateway_port);
}

The bridge gateway IP is not a stable substitute in rootless mode because it can live inside the user namespace rather than on the host.

Layer 3 Inner Sandbox Network Namespace

Inside the container, the supervisor creates another network namespace for the user workload:

Container on the Podman bridge
  |
  Supervisor process, running in container's default netns
  |
  +-- Proxy listener at the inner namespace gateway address
  |
  +-- veth pair
  |
  +-- Inner network namespace
       |
       sandbox-side veth address
       |
       default route -> supervisor-side veth address
       |
       user code runs here
       |
       nftables rules:
         ACCEPT -> proxy TCP
         ACCEPT -> loopback
         ACCEPT -> established/related
         LOG    -> TCP SYN bypass attempts
         REJECT -> TCP
         LOG    -> UDP bypass attempts
         REJECT -> UDP

The supervisor uses nsenter --net= rather than ip netns exec to avoid sysfs remount issues that arise under rootless Podman where real host CAP_SYS_ADMIN is unavailable.

A tmpfs is mounted at /run/netns in the container spec so the supervisor can create named network namespaces. In rootless Podman this directory does not exist on the host, so a private tmpfs gives the supervisor its own writable /run/netns without needing host filesystem access.

Complete Data Paths

SSH Session

Client, openshell CLI
  |
  1. gRPC: CreateSshSession -> gateway, returns token and connect_path
  2. HTTP CONNECT /connect/ssh to gateway
     headers: x-sandbox-id, x-sandbox-token
  |
Gateway
  |
  3. Looks up SupervisorSession for sandbox_id
  4. Sends RelayOpen{channel_id} over ConnectSupervisor bidi stream
  |
  gRPC traverses host -> pasta translation -> container bridge
  |
Supervisor inside container
  |
  5. Receives RelayOpen, opens new RelayStream RPC back to gateway
  6. Sends RelayInit{channel_id} on the stream
  7. Connects to Unix socket /run/openshell/ssh.sock
  8. Bidirectional bridge: RelayStream <-> Unix socket
  |
SSH daemon inside container, Unix socket only
  |
  9. Authenticates. Access is gated by the relay chain.
  10. Spawns shell process
  11. Shell enters inner netns via setns(fd, CLONE_NEWNET)
  |
User shell in sandbox netns

The SSH daemon listens on a Unix socket with restrictive permissions. The published TCP port mapping exists in the container spec for compatibility and health/debug paths. Normal SSH communication uses the gRPC reverse-connect relay pattern.

Outbound HTTP Request

User code in inner netns
  |
  1. curl https://api.example.com
     HTTP_PROXY points at the local sandbox proxy
  |
  2. TCP connect to proxy
     allowed by nftables as the only ordinary egress destination
  |
  3. HTTP CONNECT api.example.com:443
  |
Supervisor proxy in container netns
  |
  4. Policy evaluation with process identity
  5. SSRF check
  6. Optional L7 TLS intercept and HTTP method/path inspection
  |
  7. If allowed, TCP connect to api.example.com:443
     from the container netns
  |
  8. Through Podman bridge -> pasta -> host -> internet

Supervisor gRPC Callback

The Podman driver auto-detects the callback endpoint scheme based on whether TLS client certificates are configured. When the RPM's auto-generated PKI is in place, the endpoint is https://host.containers.internal:17670 and the supervisor connects with mTLS. Without TLS configuration, it falls back to http://host.containers.internal:<gateway-port>.

Supervisor in container netns
  |
  1. Connects to host.containers.internal:<port>
     with mTLS when OPENSHELL_TLS_* paths are set
  |
  2. Routed through container default gateway
  |
  3. Pasta translates L2 frame -> host L4 socket when rootless backend uses pasta
  |
  4. Host TCP socket connects to gateway
  |
Gateway
  |
  5. TLS handshake when enabled
  6. ConnectSupervisor bidirectional stream established
  7. Heartbeats at the interval accepted by the gateway
  8. Reconnects with exponential backoff on failure
  9. Same gRPC channel reused for RelayStream calls

The gateway binds to 127.0.0.1:17670 by default in the RPM packaging. Client certificates are auto-generated by openshell-gateway generate-certs on first start and bind-mounted into sandbox containers by the Podman driver.

Differences from the Kubernetes Driver

Aspect	Kubernetes	Podman, rootless pasta
Container or pod IP	Routable cluster-wide	Non-routable from the host in common rootless setups.
Network reachability	Pod IPs reachable from gateway	Bridge not reliably routable from host; requires host aliases or published ports.
Sandbox to gateway	Direct TCP to Kubernetes service or endpoint	host.containers.internal through bridge and rootless backend.
SSH transport	Reverse gRPC relay	Reverse gRPC relay.
Port publishing	Not needed for relay	Ephemeral host port remains in the container spec for compatibility and debug paths.
TLS	mTLS via Kubernetes secrets	mTLS via mounted client files, RPM defaults, or explicit configuration.
DNS	Kubernetes CoreDNS	Podman bridge DNS through aardvark-dns when DNS is enabled.
Network policy	Kubernetes network policy for pod ingress plus supervisor policy	nftables inside inner sandbox netns plus supervisor policy.
Supervisor delivery	Kubernetes driver managed pod image or template	OCI image volume mount.
Secrets	Kubernetes Secret volume and env vars	Mounted TLS client materials from a Podman secret.

Both drivers use the same reverse gRPC relay for SSH transport. The most important Podman-specific difference is network reachability: in rootless Podman, the bridge network is not reliably routable from the host, so host-to-container and container-to-host communication must use host aliases, published ports, or the supervisor relay.

Port Assignments

Port	Component	Purpose
17670	Gateway	Default local gRPC and HTTP multiplexed server port.
2222	Sandbox	Container port mapping default for the SSH compatibility port.
3128	Sandbox proxy	HTTP CONNECT proxy inside the sandbox network model.
0	Host	Ephemeral host port requested for the container SSH compatibility port.