5 Commits

Include renames

Author	SHA1	Message	Date
Jim Meyer	8c7dd148a9	perf(net): set TCP_NODELAY on latency-sensitive TCP hops (#2220) ... * perf(net): set TCP_NODELAY on all tunnel and proxy TCP hops The sandbox tunnel added ~44 ms of latency to every small request/response because no socket in the path disabled Nagle's algorithm, so sub-MSS writes waited on delayed ACKs at each hop. Set TCP_NODELAY on every latency-sensitive TCP socket: - gateway: accepted connections on the public listener (gRPC relay frames and WS tunnel writes) - CLI: edge tunnel local accept + underlying WebSocket TCP stream, insecure TLS connector (tonic's default connector already does this), and service-forward accepted sockets - supervisor: direct-tcpip connect into the sandbox netns, TCP relay target dials, egress proxy accepted connections, and all upstream CONNECT/HTTP dials (via a new connect_upstream helper) Setting TCP_NODELAY on connect is best-effort: a failure only costs latency, so we log and continue rather than fail the connection. The sandbox SSH transport rides a unix domain socket and gRPC client channels use tonic defaults (nodelay on), so no change is needed there. Fixes #2219 Signed-off-by: Jim Meyer <jim@meyer4hire.com> * refactor(net): house TCP_NODELAY helper in a shared net module Address review feedback on the TCP_NODELAY change: - Move the shared set-nodelay helper out of supervisor_session into a new crate-private `net` module in openshell-supervisor-process, so ssh and supervisor_session no longer reach across modules through a pub(crate) item. - Make the best-effort comments at each call site terse and consistent. No behavior change; the benchmark ladder reproduces the same numbers. Signed-off-by: Jim Meyer <jim@meyer4hire.com> * refactor(net): consolidate TCP_NODELAY helpers into openshell_core::net Move the best-effort TCP_NODELAY helpers into the shared openshell_core::net module so every crate dials and configures sockets the same way: - Add set_tcp_nodelay_best_effort (accepted/existing streams) and connect_tcp_nodelay_best_effort (dial + set) with unit tests. - Migrate all call sites in openshell-cli, openshell-server, and the supervisor crates to the shared helpers. - Remove the crate-private net module from openshell-supervisor-process. - Document socket guidance in AGENTS.md (Network Sockets). Signed-off-by: Jim Meyer <jim@meyer4hire.com> * perf(net): set TCP_NODELAY on exec bridge and metadata server The gateway-side single-use SSH-over-relay loopback bridge and the sandbox IMDS metadata server were missed latency-sensitive TCP hops. Set TCP_NODELAY on the accepted client connection and both russh client dials of the exec bridge — interactive keystrokes and line-buffered PTY output are the most tinygram-heavy traffic in the system — and on the metadata server's accepted connections. Also log unrecognized MaybeTlsStream variants in the edge tunnel so a future TLS-backend change surfaces a silent TCP_NODELAY miss instead of skipping it quietly. Signed-off-by: Jim Meyer <jim@meyer4hire.com> * perf(net): set TCP_NODELAY on openshell-sdk socket paths The openshell-sdk crate landed on main with its own copies of the CLI's hand-rolled sockets, which the CLI and TUI are meant to consume. Give them the same treatment as the CLI equivalents: - edge_tunnel: the accepted local tunnel connection and the WebSocket's underlying TCP socket (plain and rustls variants). - transport: the dial in InsecureTlsConnector, tonic's custom-connector path. Only these hand-rolled sockets need it. Tonic's own connector defaults tcp_nodelay to true and applies it itself, so plain Endpoint::connect callers were already covered. Signed-off-by: Jim Meyer <jim@meyer4hire.com> --------- Signed-off-by: Jim Meyer <jim@meyer4hire.com>	2026-08-04 17:59:13 +00:00
Drew Newberry	59f7839f6b	fix(auth): report gateway authentication status (#2435) ... * fix(auth): report gateway authentication status Signed-off-by: Drew Newberry <anewberry@nvidia.com> * fix(auth): reuse gateway info for status probe Signed-off-by: Drew Newberry <anewberry@nvidia.com> --------- Signed-off-by: Drew Newberry <anewberry@nvidia.com>	2026-07-23 20:01:28 +00:00
Derek Carr	5952a5a23f	feat(workspace): add workspace resource model with scoping, membershi… (#2243) ... * feat(workspace): implement workspace model (Phase 1 of RFC 0011) Implements workspace and membership model providing hard isolation boundaries for multi-player OpenShell deployments. Workspace CRUD with Kubernetes-style Terminating phase for graceful deletion. All resources scoped by workspace via ObjectMeta. Membership RPCs for workspace access control. Persistence migration shifts name uniqueness to (object_type, workspace, name). Provider profiles support platform and workspace scoping. Service routing uses workspace-prefixed DNS labels. Inference routes renamed and workspace-scoped with DeleteInferenceRoute RPC. Python SDK with WorkspaceClient, two-method list pattern (workspace-scoped and for_all_workspaces), and workspace parameter on all methods. CLI workspace flags, TUI workspace cycling. K8s driver filters unmanaged CRs and uses delete preconditions. Podman driver uses immutable container IDs. Label serialization fixed across all put_if call sites. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(cli): delegate sandbox upload command to existing upload function The standalone `sandbox upload` command reimplemented upload logic inline with two bugs: it used `Path::exists()` which follows symlinks (rejecting dangling symlinks), and it ran git-aware filtering on symlink sources. The `run::sandbox_upload()` function already handles both cases correctly via `sandbox_upload_plan()`. Replace the inline logic with a call to the existing function. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(e2e): shorten sandbox names and fix test compatibility Shorten the sandbox name in initial_sparse_policy_is_acknowledged_as_loaded from 'e2e-2159-sparse-enrich' (22 chars) to 'e2e-sparse-enrich' (17 chars) to comply with MAX_ROUTABLE_NAME_LEN (19 chars). Also capture stderr in create_keep_with_args so future sandbox creation failures include the actual CLI error instead of reporting empty output. Signed-off-by: Derek Carr <decarr@redhat.com> * test(workspace): add test coverage for workspace CRUD and persistence isolation Add unit tests for workspace create happy path, get round-trip, get not-found, get empty-name rejection, already-exists error, and resolve_workspace not-found. Add persistence test proving cross-workspace name uniqueness (same name in different workspaces produces separate records). Add workspace name max-length boundary tests. Fix e2e harness to include stderr in name-parse-failure error path. Align Python e2e test_workspace_crud with try/finally pattern. Document provider profile catalog workspace scoping gap in RFC 0011. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(examples): update examples for workspace model compatibility Shorten sandbox names in demo scripts to fit the 19-character MAX_ROUTABLE_NAME_LEN limit: policy-demo prefix to pd-, multi-agent notepad derives a short SANDBOX_TAG from the run ID, governance interceptor uses gs-PID-RANDOM. Update vscode-remote-sandbox.md SSH host aliases from openshell-{name} to openshell-{name}.{workspace} format. Signed-off-by: Derek Carr <decarr@redhat.com> * feat(sdk): add workspace-scoped client and workspace CRUD Add WorkspaceScopedClient modeled after kube::Api::namespaced — captures workspace once and injects it into every sandbox request. Add workspace CRUD methods (create, get, list, delete) and list_sandboxes_all_workspaces on OpenShellClient. Extend SandboxRef with workspace field and add WorkspaceRef type. Include mock tests for all new operations. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(lint): resolve clippy warnings in workspace test assertions Signed-off-by: Derek Carr <decarr@redhat.com> * fix(docs): convert indented code blocks to fenced in RFC 0011 Signed-off-by: Derek Carr <decarr@redhat.com> * fix(lint): resolve clippy warnings and apply cargo fmt across workspace Auto-format with cargo fmt and fix clippy warnings exposed by the reformat: unnecessary qualifications, map_unwrap_or, identical match arms, unused variable prefix, dead code annotations, and let-unit-value in e2e harness. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(workspace): address workspace scoping issues from review - Add workspace field to settings JSON output (CLI) - Skip Podman containers missing workspace label instead of defaulting to empty string, matching K8s driver behavior - Add resource_version to list_by_scope SELECT in both SQLite and Postgres backends, with regression test - Gate PolicyLocalContext proposal/lookup routes on workspace readiness, returning 503 when workspace is not yet discovered - Block sandbox and provider creation in TUI all-workspaces mode - Clear workspace vectors in TUI reset_sandbox_state Signed-off-by: Derek Carr <decarr@redhat.com> * fix(workspace): make provider profile catalog workspace-aware Thread workspace through snapshot_catalog so the EffectiveProviderProfileCatalog enforces workspace boundaries on both read and write paths. UserProviderProfileSource now loads platform-scoped profiles (workspace "") plus the target workspace's profiles, preventing cross-workspace duplicate profile ID collisions that previously caused global catalog failures. Update RFC 0011 to reflect catalog scoping is implemented in Phase 1 rather than deferred to future work. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(persistence): include workspace column in atomic policy revision INSERT put_policy_revision_atomic omitted the workspace column from the INSERT into the objects table in both SQLite and Postgres backends, causing atomically-written policy revisions to lose their workspace association. Add workspace field to AtomicPolicyRevisionWrite and thread it through both backend INSERT statements, matching the non-atomic put_policy_revision path which already included it. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(proxy): skip ancestor walk when socket owner is the entrypoint collect_ancestor_identities walked the entire process tree above the entrypoint when the connecting process was the entrypoint itself, SHA256-hashing every ancestor binary (IDE, shell, container runtime). On dev machines with large binaries in the ancestor chain this exceeded the 30-second test timeout. When start_pid == stop_pid there are no intermediate ancestors to verify, so return an empty list immediately. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(workspace): make provider profile catalog scope-aware Allow the same profile ID at platform and workspace scopes by introducing layered catalog entries where workspace profiles shadow platform profiles. Add source and scope fields to the ProviderProfile proto and CLI output. Migrate List/Get handlers to the catalog, fixing divergence with runtime profile resolution. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(e2e): align podman e2e labels with centralized driver constants The podman driver moved its container labels to the centralized openshell.ai/ prefix, but the e2e test harness and cleanup script still referenced the old openshell.sandbox-* keys, causing the local_driver_token_restart test to fail on container lookup. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(e2e): align python profile isolation test with scope-aware catalog Platform profiles are now visible in workspace listings as fallbacks per the layered catalog design. Update the assertion to match. Signed-off-by: Derek Carr <decarr@redhat.com> * fix(workspace): honor profile_workspace in runtime profile resolution Runtime profile lookups now consult provider.profile_workspace via get_type_profile_for_scope. Providers created with --global-profile (profile_workspace="") resolve to the platform profile even when a workspace profile shadows the same ID. All 6 runtime call sites updated; type-only call sites remain scope-agnostic. Signed-off-by: Derek Carr <decarr@redhat.com> --------- Signed-off-by: Derek Carr <decarr@redhat.com>	2026-07-21 00:59:18 +00:00
Drew Newberry	802932138b	fix(sdk): initialize sandbox annotations (#2296) ... The SDK merged after CreateSandboxRequest and ObjectMeta gained annotations on main, leaving stale struct initializers that prevented the crate and its tests from compiling. Initialize the curated request and mock metadata with empty annotation maps. Signed-off-by: Drew Newberry <anewberry@nvidia.com>	2026-07-15 08:13:50 -07:00
Max Dubrinsky	e6f319c76d	feat(sdk): add openshell-sdk crate (#1862) ... * feat(sdk): add openshell-sdk crate Additive extraction of the shared async gRPC client core (transport, TLS, OIDC single-flight refresh, edge tunnel, high-level sandbox surface, raw escape hatch) as a new workspace crate. No existing consumers yet; CLI/TUI migration follows in a separate PR. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * refactor(sdk,core): reuse shared JWT exp decoder for refresh deadlines Extract the signature-unverified JWT exp decode out of openshell-core/grpc_client.rs into openshell_core::jwt::parse_exp_secs, and have the openshell-sdk refresh path reuse it to derive a proactive refresh deadline from a bearer JWT when the caller does not advertise expires_at. Addresses review feedback to reuse pre-existing logic rather than reimplement JWT expiry handling per client. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * fix(sdk): harden refresh single-flight and redact tokens in Debug Addresses review feedback on the openshell-sdk refresh path. - Make the single-flight cleanup cancellation-safe. The in-flight slot is now cleared by the shared refresh computation itself (epoch-guarded) rather than the leader's post-await code. Previously, if the leader future was dropped (e.g. an FFI caller cancelling its promise) after a follower drove the refresh to completion, the completed future was stranded in the slot and later refresh_now() calls re-joined it, pinning the client to a stale or already-rejected token. Adds a regression test that cancels the leader and asserts the next refresh starts a fresh attempt. - Redact bearer secrets from Debug. RefreshedToken and the oidc RefreshTokenInput/RefreshTokenOutput now use manual Debug impls that omit the access/refresh token fields via finish_non_exhaustive, matching the house style (e.g. SecretResolver, SandboxJwtIssuer). Prevents a stray {:?} or a containing struct's derived Debug from writing tokens to logs. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * fix(sdk): fail refresh when the new token can't be encoded as metadata store_bearer now returns an error instead of silently keeping the previous bearer value. The TokenSource commits the refreshed token to its state before the client writes it into the interceptor slot, so a silent drop left the interceptor on the old (expiring) token with no path back to a refresh. Surfacing the error fails the call loudly instead. Adds a unit test covering a token that can't be encoded as gRPC metadata. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * fix(sdk): refresh OIDC tokens on raw routes and harden rotation Raw gRPC access never triggered OIDC refresh: a client that only used raw_grpc/raw_inference kept sending the initial bearer until it expired, with no proactive or reactive refresh. Add raw_grpc_fresh and raw_inference_fresh accessors that refresh before returning the client, plus force_refresh for reactive recovery after an Unauthenticated raw RPC. Guard the single-flight refresh commit against a concurrent replace(). The in-flight attempt now records the generation it started from and skips its write when an external replace() has advanced it, so timer or callback driven rotation is no longer clobbered by a slower refresh. Remove TokenSource::snapshot(): it returned an empty string under write contention and had no consumer on the CLI/TUI path. Tests read committed state directly instead. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * docs(sdk): rewrite crate README for consumers Recast the openshell-sdk README as a usable crate README rather than an RFC excerpt. Drop the Responsibilities/Non-responsibilities/Consumers scope-boundary sections and the mTLS migration rationale, folding the useful facts (explicit token, no disk/name resolution, Refresh trait, SdkError mapping) into the intro, a new Auth and refresh section, and Public surface. Remove the dead relative RFC link and status-label prose so the doc renders cleanly wherever it is published. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * fix(sdk): address review feedback on OIDC refresh and transport Apply Drew's review notes on PR #1862: - Drop unused `rustls-pemfile` dependency and move `tokio-stream` to dev-dependencies (only used by tests). - Guard OIDC `expires_at` against u64 overflow with `saturating_add`. - Fix stale `#[non_exhaustive]` rationale in `AuthConfig` (the struct `Oidc` variant it described as future already ships). - Stop double-wrapping refresh errors: store the bare refresh-error text so the single `SdkError::auth` wrap happens once at await. - Strip stale CLI porting breadcrumbs from `build_channel` docs, keeping the branch table. - Treat proactive token refresh as best-effort: a transient failure falls through to the request instead of failing an RPC whose current token is still valid, with a regression test. - Collapse `exec`'s inline auth retry into the shared `unary` helper. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> * fix(sdk): preserve transient/terminal distinction in refresh errors The refresh single-flight collapsed both `RefreshError::Transient` and `RefreshError::Terminal` into a stringified `SdkError::Auth`, so consumers (CLI, TUI, future language bindings) had no machine-readable way to tell a retryable IdP blip from a dead session that needs re-authentication. Carry the `RefreshError` through the shared outcome (kept `Clone` for `Shared`) instead of its rendered text, and map it at the await site to a new `retryable` flag on `SdkError::Auth`. Add `SdkError::auth_retryable` and a `SdkError::retryable()` accessor; transient refresh failures report `true`, every other error `false`. Add classification tests. Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com> --------- Signed-off-by: Max Dubrinsky <mdubrinsky@nvidia.com>	2026-07-14 22:35:46 -07:00