mirror of
https://github.com/NVIDIA/OpenShell.git
synced 2026-10-29 07:23:25 +08:00
codex/alpine-default
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
0a770d9173 |
feat(kubernetes): support HA gateway rebalancing (#1868)
* feat(kubernetes): support HA gateway rebalancing Signed-off-by: Drew Newberry <anewberry@nvidia.com> * perf(server): cache peer connections, tokens, and owner lookups Every forwarded relay rebuilt its setup from scratch: an owner lookup, a blocking read of the peer token, a TLS connect to the owning replica, and a TokenReview plus Pod GET on the receiving side. Sandbox service routing does this per HTTP request, so the apiserver calls scaled with traffic. Cache all of it on ServerState: - peer channels pooled per endpoint, so relays multiplex over one connection instead of redialing - peer tokens keyed by SHA-256, expiring at min(ttl, token exp) so a hit cannot accept an expired token - owner records for 3s against a 45s ownership TTL, still freshness checked before use Entries are evicted when a relay fails. Also raise HTTP/2 max_concurrent_streams to 1024, since pooling funnels every relay between two replicas onto one connection and hyper's default of 200 sits below the 256 pending-relay budget. Signed-off-by: divesh <dgude@nvidia.com> * perf(server): pool upstream connections for sandbox services Each HTTP request to a sandbox service opened its own supervisor relay, paying a new TCP connection and HTTP/1 handshake every time. Worse, it counted against the 32 in-flight relay cap, so a service handling more than 32 concurrent requests failed outright. Pool idle upstreams per endpoint and port, up to 8 each for 15s. Reuse is safe because the pool only returns a connection hyper reports as ready, and HTTP/1 cannot start a request until the previous body has drained. Upgrades are never pooled since they take the connection over, and a failed send evicts that endpoint. Pruning is bounded per key, with the full sweep limited to once per 30s. Signed-off-by: divesh <dgude@nvidia.com> * fix(server): address HA gateway review findings (#3449) - Let a gateway own supervisor sessions without a peer endpoint. Requiring one whenever the store is PostgreSQL broke every single-instance PostgreSQL deployment, because no sandbox supervisor could connect. A cross-replica request to an owner that advertises no endpoint now fails immediately naming the cause, instead of retrying until the wait timeout. - Close a supervisor session on heartbeat only when another replica owns it, or after renewals fail for the ownership TTL. A database error no longer drops every session heartbeating during an outage. - Clamp owner record ages at zero so a skewed or corrupt stored timestamp cannot produce a negative age. - Bound the cross-object advisory lock with a lock timeout, so a stuck holder fails instead of blocking every mutation in the fleet. - Refuse to start when a peer endpoint is configured on a multi-replica backend but peer authentication is unavailable, and warn when a multi-replica backend has no peer endpoint at all. - Reject a plaintext peer endpoint when the gateway serves TLS. - Skip the sandbox watch poller on single-replica backends, where the local update bus already sees every write. - Rate-limit the peer owner cache sweep so an insert no longer scans the whole map under the lock. - Retry GET and HEAD on a pooled upstream the sandbox closed, instead of returning 502, and drop an emptied endpoint from the pool right away. - Document the gateway peer environment variables and the post-rollout ownership skew operators should expect. Signed-off-by: divesh <dgude@nvidia.com> * fix(server): harden HA supervisor ownership Signed-off-by: Drew Newberry <anewberry@nvidia.com> --------- Signed-off-by: Drew Newberry <anewberry@nvidia.com> Signed-off-by: divesh <dgude@nvidia.com> Co-authored-by: Drew Newberry <anewberry@nvidia.com> Co-authored-by: divesh <dgude@nvidia.com> Co-authored-by: Divesh Chowdary <47188680+FrostGod@users.noreply.github.com> |
||
|
Brandon Squizzato
|
cc780d4e17 |
feat(helm): add BackendTLSPolicy support (#2728)
* feat(helm): add optional BackendTLSPolicy for e2e TLS Add grpcRoute.backendTLSPolicy values to optionally create a BackendTLSPolicy resource that enables end-to-end TLS between the Gateway proxy and the OpenShell gateway pod. The Gateway proxy terminates client-facing TLS and re-encrypts when connecting to the backend, validating the pod's certificate against a user-supplied CA ConfigMap. This removes the requirement to set server.disableTls=true when using HTTPS at the Gateway listener. Supported on OpenShift 4.22+ and other platforms with BackendTLSPolicy support in the Gateway API implementation. Update OpenShift and ingress documentation with e2e TLS instructions. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * feat(helm,server): auto-create backend CA ConfigMap in certgen hook Extend the generate-certs command with --backend-ca-configmap-name and --backend-ca-source-secret flags. When BackendTLSPolicy is enabled, the certgen pre-install hook creates the CA ConfigMap automatically: - pkiInitJob mode (default): uses the CA from the generated PKI bundle. Fully automatic on first install. - cert-manager mode: reads ca.crt from the server TLS Secret. On first install the Secret does not exist yet (cert-manager reconciles after templates are applied), so the ConfigMap is created on the first helm upgrade. Logs a warning on the initial skip. The caCertificateConfigMapName value now defaults to <fullname>-backend-ca when empty, so users only need to set backendTLSPolicy.enabled=true. Update certgen RBAC to include configmaps get/create when the feature is enabled. Add CLI arg parsing tests for the new flags. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * refactor(helm): add server.tls.enableMtls flag for mTLS control Replace automatic mTLS disabling based on BackendTLSPolicy with an explicit server.tls.enableMtls flag that defaults to true. The user is now responsible for setting this to false when using BackendTLSPolicy, as ingress proxies cannot present client certificates to backends. Updated: - values.yaml: Added server.tls.enableMtls (default true) - gateway-config.yaml: Check enableMtls instead of backendTLSPolicy - _gateway-workload.tpl: Check enableMtls for client CA mount - Tests: Updated to use enableMtls flag - Docs: Added enableMtls=false to BackendTLSPolicy examples - README: Document new flag and BackendTLSPolicy requirement Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * docs(helm): clarify cert-manager backend CA ConfigMap workflow Update documentation to explain the two-step install process required when using cert-manager with BackendTLSPolicy: 1. helm install - cert-manager issues the server certificate, but the certgen hook can't create the backend CA ConfigMap yet (cert-manager reconciles after templates are applied) 2. helm upgrade - certgen hook reads the CA from the cert-manager-issued certificate and creates the ConfigMap Previously, the docs said "created on first upgrade" without explaining why or that the feature won't work until then. The updated docs now: - Explain the timing issue (cert-manager reconciles after chart install) - Provide clear steps for the cert-manager workflow - Note that pkiInitJob (default) creates it immediately on install - Clarify that users must wait for the Certificate to be Ready before running the second upgrade Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * fix(docs): remove incorrect external hostname requirement for BackendTLSPolicy BackendTLSPolicy validates the backend certificate against the service FQDN (e.g., openshell.openshell.svc.cluster.local), not the external hostname. The external hostname only needs to be on the Gateway listener certificate for client-facing TLS. The default certManager.serverDnsNames already includes all required service FQDN variants, so no configuration is needed for BackendTLSPolicy to work. Fixed incorrect documentation that claimed: - "The server certificate SAN list must include the external hostname" - Users need to "configure certManager.serverDnsNames with the external hostname" Removed the unnecessary pkiInitJob.serverDnsNames override from the example and clarified that: - Gateway listener certificate needs the external hostname (for clients) - Backend certificate needs the service FQDN (for Gateway proxy) - The service FQDN is already in the defaults Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * docs: clarify ACME with LetsEncrypt reference Change all references from "ACME issuer" to "LetsEncrypt/ACME issuer" to help users understand that LetsEncrypt is the most common ACME provider and what ACME means in practice. Updated: - docs/kubernetes/managing-certificates.mdx - docs/kubernetes/openshift.mdx - deploy/helm/openshell/values.yaml - deploy/helm/openshell/README.md - deploy/helm/openshell/ci/values-openshift-route-cert-manager.yaml Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * docs(openshift): restructure end-to-end TLS options and clarify Gateway hostname Reorganize the OpenShift production deployment documentation: 1. Changed main section from "Production Deployments" to "Options for end-to-end TLS" for better clarity 2. Renamed subsections for consistency and clarity: - "End-to-end TLS using Gateway API and BackendTLSPolicy (OpenShift 4.22+)" - "End-to-end TLS using pass-through Route (all OpenShift versions)" 3. Clarified that the Gateway hostname is typically a wildcard: "typically a wildcard like *.openshell-ingress-gw.example.com" 4. Removed the recommendation to copy the cluster's wildcard certificate from openshift-ingress namespace, as this is not a recommended security best practice These changes make it clearer that users have two end-to-end TLS options and help them understand the typical naming pattern for Gateway hostnames. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * feat(helm): eliminate two-stage install for BackendTLSPolicy with cert-manager When using BackendTLSPolicy with cert-manager, the certgen hook now polls for up to 90 seconds waiting for cert-manager to issue the TLS certificate before creating the backend CA ConfigMap. This eliminates the need for a second `helm upgrade` in most cases. The hook polls every 2 seconds with progress logging every 10 seconds. If cert-manager takes longer than 90 seconds, the hook times out gracefully and logs a warning, preserving the fallback to manual ConfigMap creation or a second upgrade. The Job's activeDeadlineSeconds is 120s, so the 90s timeout leaves 30s margin for ConfigMap creation and hook completion. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * feat(helm): add configurable timeout for certgen hook Add `pkiInitJob.timeoutSeconds` Helm value (default 120) to control how long the certgen hook Job can run. When using cert-manager with BackendTLSPolicy, the hook polls for (timeoutSeconds - 30) seconds to leave margin for ConfigMap creation and cleanup. This allows users to increase the timeout for environments where cert-manager takes longer than 90 seconds to issue certificates, without requiring code changes. Example usage: ```yaml pkiInitJob: timeoutSeconds: 180 # Hook polls for 150 seconds ``` Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * docs(helm): document configurable certgen timeout Update documentation to mention the pkiInitJob.timeoutSeconds value and how it affects the cert-manager polling behavior when using BackendTLSPolicy. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * feat(helm): add configurable failure behavior for certgen timeout Add `pkiInitJob.failOnTimeout` Helm value (default false) to control whether the certgen hook fails or succeeds when cert-manager does not issue a certificate within the polling timeout. When false (default), the hook succeeds with a warning and users can run `helm upgrade` after cert-manager issues the certificate to create the backend CA ConfigMap. This provides backwards-compatible behavior. When true, the hook fails immediately if the timeout is reached, providing clear feedback that BackendTLSPolicy is non-functional. This is useful for strict validation requirements where incomplete installs should fail fast. Example usage: ```yaml pkiInitJob: timeoutSeconds: 180 failOnTimeout: true # Fail install if cert-manager takes >150s ``` Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * feat(helm): change failOnTimeout default to true and add troubleshooting docs Change `pkiInitJob.failOnTimeout` default from false to true to provide immediate feedback when cert-manager does not issue certificates within the polling timeout. This prevents silent failures where BackendTLSPolicy is non-functional but the install appears to succeed. Add comprehensive troubleshooting section to docs/kubernetes/ingress.mdx documenting the specific error "TLS error: Secret is not supplied by SDS" that occurs when the backend CA ConfigMap is missing, with step-by-step resolution instructions. Updated comments in values.yaml to clearly document the default behavior and explain when administrators might see connectivity errors if they override the default to failOnTimeout=false. BREAKING CHANGE: pkiInitJob.failOnTimeout now defaults to true. Helm installs will fail if cert-manager takes longer than (timeoutSeconds - 30) seconds to issue certificates. To restore the old behavior of allowing installs to succeed with a warning, set `pkiInitJob.failOnTimeout=false`. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * fix(helm): make cert-manager resources pre-install hooks to fix ordering Make Certificate and Issuer resources run as pre-install/pre-upgrade hooks with weight -30, before the certgen hook (weight -20). This fixes the chicken-and-egg problem where the certgen hook was waiting for Secrets created by Certificates that hadn't been created yet. **Hook ordering:** 1. Certificate and Issuer resources created (weight -30) 2. cert-manager issues certificates and creates Secrets 3. certgen hook runs (weight -20), finds Secrets, creates ConfigMap 4. Main resources (StatefulSet, Service, etc.) created Previously, the certgen pre-install hook would run before any resources were created, poll for a non-existent Secret, timeout, and fail. The Certificate resources would never get created because Helm waits for all pre-install hooks to succeed before creating main resources. This fix allows single-stage installs to work reliably as long as cert-manager can issue certificates within the polling timeout. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * feat(helm): add validation to prevent enableMtls with BackendTLSPolicy Add Helm chart validation that fails the install if both server.tls.enableMtls=true and grpcRoute.backendTLSPolicy.enabled=true are set, since this is an invalid configuration. BackendTLSPolicy requires mTLS to be disabled because the Gateway proxy cannot present client certificates to the backend. This validation provides immediate, clear feedback at install time rather than allowing the misconfiguration to be discovered through runtime errors. Example error message: ``` Error: grpcRoute.backendTLSPolicy requires mTLS to be disabled because the Gateway proxy cannot present client certificates to the backend; set server.tls.enableMtls=false ``` Also updated documentation to mention this validation check. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * docs(helm): clarify pkiInitJob.timeoutSeconds polling behavior Improve documentation to clearly explain that pkiInitJob.timeoutSeconds controls the Job deadline, but the actual polling timeout is (timeoutSeconds - 30) to reserve 30 seconds for ConfigMap creation and cleanup. Added concrete example: "timeoutSeconds=180 allows 150 seconds of polling" to make the relationship explicit and avoid confusion where users might expect the hook to poll for the full timeout value. Updated both values.yaml inline comments and ingress.mdx documentation for consistency. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * docs(openshift): remove outdated two-stage install instructions Update OpenShift documentation to reflect that single-stage installs now work with cert-manager and BackendTLSPolicy. The Certificate resources run as pre-install hooks (weight -30) before certgen (weight -20), allowing the hook to poll for and find the issued certificates. Removed the outdated two-step process: 1. helm install (cert-manager issues cert, hook logs warning) 2. helm upgrade (hook creates ConfigMap) Replaced with current single-stage behavior: - Certificate resources created as pre-install hooks - certgen hook polls for up to 90 seconds (configurable) - Single helm install succeeds in most cases - Fails fast by default if timeout reached This brings openshift.mdx in line with the already-updated ingress.mdx documentation. Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> * fix(helm): make pkiInitJob.timeoutSeconds the actual polling duration The timeout value now represents the actual polling time that users experience when waiting for cert-manager to issue certificates. The Job activeDeadlineSeconds is set to (timeoutSeconds + 30) to allow buffer time for ConfigMap creation and cleanup. Previously, the hook polled for (timeoutSeconds - 30) seconds, which was confusing when users set timeoutSeconds=180 and only got 150 seconds of actual polling. Updated documentation in values.yaml, ingress.mdx, and openshift.mdx to reflect the clearer behavior. Signed-off-by: Brandon Squizzato <bsquizza@nvidia.com> * docs(helm): update values.yaml and README with correct polling duration Updated the caCertificateConfigMapName description to reflect that the hook polls for exactly pkiInitJob.timeoutSeconds seconds, not (timeoutSeconds - 30) seconds. Regenerated README.md with helm-docs. Signed-off-by: Brandon Squizzato <bsquizza@nvidia.com> * docs(kubernetes): add OIDC configuration to helm install and CLI examples Updated all helm install and openshell gateway add examples in ingress.mdx and openshift.mdx to include OIDC issuer and audience configuration. Examples now use concrete placeholder values: - OIDC issuer: https://keycloak.example.com/realms/openshell - OIDC audience: openshell-cli - Hostname: gateway.example.com - ClusterIssuer: letsencrypt-prod This makes it clearer how to configure OIDC authentication, which is required when using BackendTLSPolicy or HTTPS termination since the Gateway proxy cannot present client certificates to the backend. Signed-off-by: Brandon Squizzato <bsquizza@nvidia.com> * docs(kubernetes): explicitly list OIDC client ID in gateway add examples Added --oidc-client-id openshell-cli to all openshell gateway add commands in ingress.mdx and openshift.mdx, making the default client ID explicit in the examples even though it's the CLI default. This improves clarity and helps users understand the complete OIDC configuration needed for gateway registration. Signed-off-by: Brandon Squizzato <bsquizza@nvidia.com> * fix(helm): address PR review feedback for BackendTLSPolicy - Read backend CA from the authoritative server Secret instead of the in-memory PKI bundle so enabling BackendTLSPolicy on an existing release uses the CA that actually signed the server certificate. - Reconcile the backend CA ConfigMap on every hook run (compare and update) instead of skipping when it already exists, so CA rotations propagate automatically. - Remove hook annotations from cert-manager Issuer/Certificate resources so they remain regular release objects managed by Helm lifecycle. Split the cert-manager backend CA ConfigMap creation into a separate post-install/post-upgrade hook Job that polls after cert-manager Certificate resources are applied. - Update architecture/gateway.md, docs/reference/gateway-config.mdx, debug-openshell-cluster skill, and helm-dev-environment skill with BackendTLSPolicy, backend CA ConfigMap, enableMtls, and timeout documentation. Signed-off-by: Brandon Squizzato <bsquizza@nvidia.com> Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * fix(docs): resolve markdown lint errors in helm README and kubernetes docs Escape inline HTML angle brackets in README.md template placeholders, remove trailing spaces, and add blank lines around fenced code blocks in numbered lists. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * Update docs * fix(helm): escape inline HTML in values.yaml descriptions and sync mise lockfile Wrap `<fullname>` and `<namespace>` template placeholders in backticks so markdownlint does not flag them as inline HTML (MD033). Regenerate mise.lock to match current mise.toml after rebase onto main. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * Run 'mise lock' * fix: align mise.lock with CI mise version output The lockfile was regenerated locally with mise 2026.8.10 which resolves uv Linux artifacts to gnu variants and adds provenance_verified fields, but CI uses v2026.4.25 which produces musl variants without those fields. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> * fix(docs): correct cert-manager hook ordering and clientCaSecretName comment Update ingress.mdx and openshift.mdx to describe Certificate resources as regular release objects with a post-install/post-upgrade Job, matching the current implementation and architecture/gateway.md. Fix values.yaml clientCaSecretName comment to state that "" disables client certificate verification, matching the helper and access-control docs. Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> --------- Signed-off-by: Brandon Squizzato <bsquizza@redhat.com> Signed-off-by: Brandon Squizzato <bsquizzato@nvidia.com> Signed-off-by: Brandon Squizzato <bsquizza@nvidia.com> |
||
|
Yuedong Wu
|
e508c169ea |
fix(helm): honor empty clientCaSecretName for HTTPS-only mode (#2235)
* fix(helm): honor empty clientCaSecretName for HTTPS-only mode Signed-off-by: Yuedong Wu <dwcn22@outlook.com> * docs(skills): document HTTPS-only clientCaSecretName in debug-openshell-cluster Signed-off-by: Yuedong Wu <dwcn22@outlook.com> --------- Signed-off-by: Yuedong Wu <dwcn22@outlook.com> |
||
|
Jesse Jaggars
|
c4b500a7de |
feat(helm): cert-manager external issuer + OpenShift passthrough Route (#2468)
* fix(core): trust public root CAs alongside the sandbox mTLS CA The supervisor gRPC client only trusted the CA configured via OPENSHELL_TLS_CA, since tonic ClientTlsConfig starts with an empty root store unless with_native_roots()/with_webpki_roots() is also enabled. Deployments where the gateway server certificate is issued by a public CA (e.g. cert-manager against an ACME issuer) caused every supervisor connection to fail the TLS handshake with "UnknownCA", since the sandbox mTLS CA and the server cert issuer were no longer the same. Enable both native and webpki roots in addition to the configured CA. tonic root store is a union of all configured sources, so this does not weaken verification for existing self-signed deployments. webpki-roots (compiled in) is enabled alongside native-roots since the supervisor binary may run in minimal sandbox images without a populated system CA bundle. Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> * feat(helm): support external cert-manager issuers and OpenShift Route passthrough Add certManager.serverIssuerRef/clientIssuerRef so the gateway and mTLS client certificates can be issued by a real Issuer/ClusterIssuer (e.g. ACME) instead of only the chart built-in self-signed CA. Add openshiftRoute template for exposing the gateway via a TLS passthrough Route so the gateway keeps terminating its own TLS/mTLS. The server Certificate excludes internal-only SANs (cluster-local, localhost, loopback) when an external issuer is configured, since ACME issuers reject those per CA/Browser Forum baseline requirements. A template-time fail guard catches the misconfiguration at helm install time rather than asynchronously at cert-manager issuance time. Includes Helm unittest coverage for both issuerRef overrides and Route rendering, plus a CI values overlay for lint coverage. Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> * docs: document cert-manager external issuer and OpenShift Route Update managing-certificates.mdx with the serverIssuerRef workflow and install-time validation behavior. Add a production section to the OpenShift guide covering passthrough Route with a real certificate. Regenerate Helm README for new certManager and openshiftRoute values. Sync debug-openshell-cluster skill with new troubleshooting steps for ACME issuance failures and supervisor UnknownCA from mismatched CAs. Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> * fix(helm,core): address PR review feedback on cert-manager external issuer Addresses all five blocking review items from #2468: 1. Remove .with_native_roots() from supervisor gRPC client -- the supervisor runs inside the user-selected sandbox image, so the image CA bundle is not operator-controlled. Keep .with_webpki_roots() (compiled-in, not user-controlled) alongside the configured CA. 2. Fail at render time when serverIssuerRef.name is set but clientCaFromServerTlsSecret is still true. Add negative Helm test. 3. Remove clientIssuerRef -- changing only clientIssuerRef breaks both directions because trust bundles are not modeled separately. Change serverIssuerRef.kind default from ClusterIssuer to Issuer. 4. Add server.oidc.issuer and server.oidc.audience to the documented OpenShift production Helm command. Add Access Control prerequisite. 5. Fail at render time when openshiftRoute.enabled and disableTls are both true. Add negative Helm test. Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> * fix(drivers): strip GATEWAY_TLS_SERVER_NAME from Docker and Podman env Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> * fix(helm,drivers): guard default clientCaSecretName and add env-strip tests Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> * feat(tls): SNI-based dual certificate for internal and external server TLS Split the gateway server certificate into two: an internal cert issued by the chart's own CA (for supervisor connections via cluster-local SANs) and an external cert issued by an operator-configured Issuer such as ACME/Let's Encrypt (for CLI and Route access via public SANs). The gateway uses SNI-based certificate selection: connections whose SNI hostname matches external_server_names receive the external cert; all others (including those with no SNI) receive the internal cert. Security improvement: remove .with_webpki_roots() from the supervisor gRPC client so supervisors trust only the chart CA, closing a MITM vector via publicly-trusted certificates in user-supplied container images. Key changes: - Add DualCertResolver with SNI-based cert selection and full test coverage - Add external_cert_path, external_key_path, external_server_names to TlsConfig - Validate partial external cert config (error on cert-without-key or vice versa) - Validate empty external_server_names when external cert is configured - Split cert-manager templates into internal + external Certificate resources - Add Helm guards for misconfigured external issuer (empty serverDnsNames, internal-only SANs with external issuer, conflicting clientCaFromServerTlsSecret) - Update gateway-config.mdx, managing-certificates.mdx, openshift.mdx docs - Update debug-openshell-cluster skill for dual-cert troubleshooting Signed-off-by: Pi Agent <agent@openshell.local> * fix(drivers): strip GATEWAY_TLS_SERVER_NAME in VM driver and correct comments Add the same GATEWAY_TLS_SERVER_NAME environment stripping to the VM compute driver that Docker, Podman, and Kubernetes drivers already perform. Without this, a sandbox user on the VM driver could override the TLS server name the supervisor verifies. Fix stale comments in Docker and Podman drivers that referenced 'with WebPKI roots trusted' — WebPKI roots are explicitly not trusted after the tls-webpki-roots removal. Use tls-ring instead of bare channel for tonic in openshell-core so the TLS API (ClientTlsConfig, Endpoint::tls_config) is available without pulling in any root certificate store. Signed-off-by: Pi Agent <agent@openshell.local> * fix(tls,helm): wildcard SNI matching and Route host validation Add RFC 6125 single-level wildcard matching to DualCertResolver so external_server_names entries like *.example.com correctly match SNI hostnames like gw.example.com. Previously only exact matches worked, silently falling back to the internal cert for wildcard configurations. Add a Helm fail guard in route.yaml that rejects openshiftRoute.host values not listed in certManager.serverDnsNames when an external issuer is configured — catches cert/route hostname mismatches at install time instead of at TLS connect time. Quote the host field in route.yaml for robustness. Signed-off-by: Pi Agent <agent@openshell.local> * fix(helm): address blocking review items — client-CA guard, wildcard Route, serverIssuerRef gate 1. Remove the obsolete guard rejecting serverIssuerRef + clientCaFromServerTlsSecret=true. The internal server certificate is always signed by the chart CA (the same CA that signs the client cert), so clientCaFromServerTlsSecret=true is correct — its filtered ca.crt is exactly the right trust anchor. The old workaround (mounting openshell-ca-tls directly) unnecessarily exposed the CA private key to the gateway container. Remove the client-CA overrides from docs, CI overlay, and production examples. 2. Route host validation now supports wildcard certificates per RFC 6125: single-level wildcards like *.example.com match gateway.example.com but not deep.sub.example.com. Require an explicit openshiftRoute.host when an external issuer is configured — without one, OpenShift generates a hostname absent from serverDnsNames. 3. Reject serverIssuerRef.name when certManager.enabled is false — the external certificate, its Secret mount, and the gateway TLS config all require cert-manager to be enabled. Validated on ROSA (dev.dyee.p3) with branch-built images: - Fresh install with letsencrypt-prod ClusterIssuer - SNI dual-cert: external hostname served Let's Encrypt cert - Supervisor mTLS via internal cert path: ConnectSupervisor accepted - Client CA volume: filtered ca.crt from internal server secret (no key) - CLI connected via Route + OIDC Helm tests: 81 pass across 7 suites. Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> --------- Signed-off-by: Jesse Jaggars <jjaggars@redhat.com> Signed-off-by: Pi Agent <agent@openshell.local> |
||
|
Taylor Mutch
|
5f58cb018f |
fix(helm): create sandbox JWT secret when cert-manager is enabled (#1700)
* fix(helm): create sandbox JWT secret under cert-manager The cert-manager install path (certManager.enabled=true, pkiInitJob.enabled=false) left the gateway StatefulSet unable to start because nothing created the openshell-jwt-keys Secret: cert-manager owns TLS Secrets but does not mint the sandbox JWT signing key, and the certgen hook only rendered when pkiInitJob.enabled was true. Separate JWT signing-key provisioning from TLS PKI provisioning: - certgen: add a --jwt-only mode that creates only the Opaque JWT signing Secret, for use when another controller owns TLS Secrets. - certgen.yaml: render the hook when pkiInitJob.enabled OR certManager.enabled is true. cert-manager takes precedence and runs the hook with --jwt-only even if pkiInitJob.enabled remains true. Remove the mutual-exclusion failure between the two values. - _helpers.tpl: add openshell.sandboxJwtSecretName, shared by the hook and the StatefulSet mount. - Update values, README, docs, architecture, and the debug-openshell-cluster skill to reflect the new precedence; the documented cert-manager install no longer needs pkiInitJob.enabled=false. Closes #1691 * fix(helm): honor cert-manager precedence for client CA volume The client CA volume logic treated pkiInitJob.enabled as proof that built-in PKI owns the client CA. With cert-manager precedence now allowing certManager.enabled=true alongside the default pkiInitJob.enabled=true, that assumption mounts the server TLS cert secret as the client CA and ignores certManager.clientCaFromServerTlsSecret=false, which can break mTLS or trust the wrong CA. Gate the pkiInitJob.enabled term with (not certManager.enabled) in all three client CA conditions (volume mount, volume definition, and secret selection) so cert-manager owns TLS when enabled. Add a Helm test suite covering built-in PKI, cert-manager shared CA, the regression config (cert-manager + clientCaFromServerTlsSecret=false + default pkiInitJob), and the no-client-CA case. |